Search results for: 'isolates'

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

Fluke 190-204-III CAL ScopeMeter offers 200 MHz bandwidth, four isolated channels, deep memory, and traceable calibration for advanced industrial troubleshooting.

AEMC OX 9062 IV 60MHz is a rugged handheld 2-channel oscilloscope with 60 MHz bandwidth, a 7-inch touchscreen, FFT, power measurement, and remote control via Wi-Fi and Ethernet.

GE Power 730157 DILOS 2-160 delivers 4-pole manual switch disconnection with 160A Ith and 690V Ui markings for electrical control and isolation setups.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

AEMC OX 9104IV Handheld Oscilloscope: Rugged 4-channel 100MHz scope with a 7" touchscreen, FFT, multimeter, Wi-Fi, and isolated inputs for lab or field use.

The AEMC OX 5042B Handscope Oscilloscope is a compact, rugged, three-in-one instrument offering oscilloscope, multimeter, and harmonic analysis capabilities all in a single handheld device. Ideal for field work and industrial environments, it delivers reliable performance with intuitive operation and a crisp color display.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

100MHz, 2-channel portable oscilloscope performance with CAT IV safety, deep memory, and Connect-and-View triggering.

Sixnet SixTRAK ST-DI-024-16M delivers 16 high-density discrete inputs for 10-32 VDC local I/O expansion in SixTRAK systems, supporting compact panel layouts with input-to-ST-Bus isolation in a module-only configuration.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

AFL 8-Channel CWDM LGX Module: Optimize your optical network with low insertion loss, high isolation, and reliable performance for CATV, Ethernet, and metro networks.

AFL Dual 4-Channel CWDM LGX Module: Enhance your network with scalable, high-performance wavelength management. Low loss, high isolation, and reliable for CATV & carrier systems.

Allen-Bradley 1746-IA16 Series B delivers reliable 16-point 120V AC input capability for SLC 500 systems, with optical isolation, LED status, and easy wiring.

Westinghouse 1C31234G31 Ovation Contact Input Module delivers 16-channel discrete signal monitoring for Ovation DCS architectures, supporting contact status acquisition for plant control, interlocks, and process visibility.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

AEMC OX 9102 IV Handheld Oscilloscope with 2 isolated channels, a 100MHz bandwidth, 7” color touchscreen, FFT, and a remote control via Wi-Fi & Ethernet.

Allen-Bradley 1771-OFE2 is a PLC analog output module built for 1771 I/O systems, delivering four isolated current outputs, selectable scaling, and block transfer operation for industrial control applications.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

WAGO 750-402 digital input module delivers reliable 4-channel 24V signal acquisition with 3 ms filtering for WAGO 750/753 systems, ideal for industrial sensors.

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.