Search results for: 'martin'

The Thermo Scientific Niton XL2 100G is a handheld X-ray fluorescence (XRF) alloy analyzer designed for general metal identification and verification. It provides non-destructive elemental analysis for common industrial alloys in a portable, field-ready instrument.

The Rohde & Schwarz FSH-Z44 directional power sensor is compatible with FSH handheld analyzers and supports 200MHz–4GHz forward and reverse RF power measurement from 30mW to 120W for transmitter and antenna testing.

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

AFL OFI-400 Fiber Identifier: Detects live fibers, directional traffic, and test tones with ease. Ergonomically designed for efficient, safe fiber identification.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

Research-Cottrell RK-1300-CSA TRC interface board for use with SCR firing assemblies in electrostatic precipitator transformer-rectifier power control systems.