Search results for: 'resists'

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

Swagelok SS-4BHT-12 is a T Series PTFE-lined stainless steel braided hose assembly with dual 1/4 in. Swagelok tube adapters. It features a 14 in. hose length with 10.2 in. live length and a temperature range of -65°F to 450°F.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.

Fluke T6-1000PRO electrical tester uses FieldSense technology to measure true RMS AC voltage and current up to 1000V and 200A through an open fork for faster, safer troubleshooting.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

Pomona 5519A replacement DMM test lead set designed for sheathed banana inputs on Fluke, HP, Tektronix, and Wavetek meters, featuring high-flex silicone wire, dual insulation, and IEC 61010 compliance.

Pomona 5909A flexible DMM test lead set with right-angle 4 mm sheathed banana plugs, designed for safe, reliable multimeter connections in tight access measurement applications.

Pomona 3846 BNC female to female panel mount coupler with isolated ground, designed for secure panel installations requiring 50-ohm impedance and electrical isolation between shell and flange.

Pomona 4911A-36-0 patch cord features retractable sheath banana plugs, molded strain relief, and nickel-plated contacts for reliable test connections.

Pomona 2249-C-60 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona 2249-C-96 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona 5672A test lead kit delivers flexible silicone leads, right-angle banana plugs, insulated alligator clips, and extended probe tips for safe DMM testing.

Fluke 717 300G Pressure Calibrator provides -12 to 300 psi measurement with 0.05% accuracy, multiple pressure units, and rugged field-ready design.

Fluke 717 1000G Pressure Calibrator delivers 0–1000 PSI measurement with 0.05% accuracy and mA measurement for precise pressure calibration tasks.

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

Fluke 287 CAL logging multimeter delivers True-RMS accuracy with TrendCapture graphing, onboard data logging, and NIST traceable calibration with data.

Fluke 393 CAT III 1500V clamp meter delivers true RMS AC/DC measurements up to 2500A with iFlex probe and IP54 protection for harsh environments.

Fluke 717 3000G pressure calibrator provides accurate 0–3000 psi gauge pressure and mA measurement with loop power for efficient field calibration.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.