Search results for: '2.0'

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

Allen-Bradley 22A-D2P3N104 PowerFlex 4 drive delivers reliable 1 HP motor control with sensorless vector performance and 480V 3-phase compatibility.

Introducing the XDS2102A Oscilloscope - Precision Redefined

AEMC 2135.71 AC Current Probe delivers MN82 current measurement for AEMC 6471/6472 ground resistance testing, including selective and stakeless ground electrode workflows.

Hubbell HBL4570C Twist-Lock Plug delivers 15A, 250V AC L6-15P connectivity in a 2-pole, 3-wire grounding Insulgrip design with black/white nylon construction.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Allen-Bradley 1489-M1C100 miniature circuit breaker delivers 10 A, 1-pole thermal-magnetic branch circuit protection with a C trip curve for control panels and IEC applications.

Allen-Bradley 1771-OFE2 is a PLC analog output module built for 1771 I/O systems, delivering four isolated current outputs, selectable scaling, and block transfer operation for industrial control applications.

Phoenix Contact MINI-PS-12-24DC/5-15DC/2 converts 12–24 V DC input into adjustable 5–15 V DC output at up to 2 A, supporting regulated voltage conversion and electrical isolation in compact DC power systems.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.