Search results for: '10$'

The Fluke 52 II dual probe digital thermometer measures two contact temperature inputs simultaneously using J, K, T, or E-type thermocouples. It provides laboratory accuracy, a large backlit display, and MIN, MAX, and AVG tracking for professional temperature measurement.

Amprobe THWD-3 digital psychrometer measures humidity and temperature with dew point and wet bulb calculations. Dual display and extended probe support HVAC duct and ambient air diagnostics.

Thomas & Betts 17220-BD copper compression terminal lugs are designed for 3/0 AWG copper conductors and 3/8 inch studs. Manufactured from tin-plated copper, these orange Color-Keyed lugs support verified crimping with compatible dies and tools. Quantity of 10 lugs per package.

Fluke TL27 heavy duty test lead set with red and black safety-shrouded banana plugs, EPDM insulation, and CAT III 1000V rating for reliable digital multimeter and process meter testing.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Fluke 717 30G pressure calibrator delivers accurate -12 to 30 psig measurements with 0.05% accuracy in a compact, field-ready design.

Fluke AC175 alligator clip set offers insulated, threaded-shaft clips with 7 mm jaw opening for secure probe connections and flexible field use.

Fluke TP4 Slim Reach Probes: Safe, stainless steel tips for deep or recessed terminals, rated CAT IV 600V/CAT III 1000V for precision testing.

Fluke BP291 rechargeable 4800 mAh Li-Ion battery delivers reliable power for oscilloscopes, analyzers, and acoustic imaging in the field.

Fluke 117 CAL Multimeter: Compact True-RMS digital meter with non-contact voltage detection, AC/DC measurement, and accurate resistance readings.

Fluke LIQ-KIT-6PACK – Bundle of six complete LinkIQ Cable+Network Tester kits with IntelliTone® 200 Probes and accessories for copper and network testing, cable verification, and PoE validation across multiple technicians.

AEMC 2154.76 Fuse Set of 3, 0.63A, 1000V fast blow fuses designed for Models 5212, 5215, and 5217, ensuring reliable circuit protection.

REES 50702-000 delivers heavy-duty SPST-NC contact control for REES push button operators and selector switches, with screw terminals and gold-plated contacts for dependable circuit switching.

B-Line B2010 conduit hanger strut clamp secures 1-inch conduit to standard strut systems with a durable two-piece steel design. Supports reliable pipe mounting with secure fastening and corrosion-resistant zinc finish.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

The PLS 180G RBP KIT is a self-leveling green cross line laser level designed for layout and installation tasks. It provides ≤1/8 in accuracy at 30 ft with 180° horizontal and 130° vertical fan angles. The kit includes a rechargeable battery pack, alkaline battery pack, magnetic L-bracket, and universal wall/ceiling bracket.

The PLS 180G Z is a self-leveling green cross line laser designed for framing, acoustic ceiling installation, tile installation, and general construction layout. It projects horizontal and vertical lines with wide fan angles for interior layout applications.

The PLS 5R is a self-leveling five-point red laser level designed for layout, alignment, and squaring tasks. It projects plumb, level, and square reference points and features a pendulum lock for transport and tilt mode operation. Supplied as a bare tool with pouch and battery pack.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Banner BT23S is a bifurcated, diffuse-mode glass fiber optic cable with a 3.2 mm bundle diameter and stainless steel monocoil sheathing. Designed for harsh industrial environments, it supports reliable sensing in high-temperature and electrically noisy applications.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

The Fluke 971 Temperature Humidity Meter is a handheld instrument for measuring air temperature, relative humidity, dew point, and wet bulb temperature. It features a backlit dual display, 99-point data storage, Min/Max/Avg functions, and a quick-response capacitance sensor for indoor air quality assessment.

Fluke 80K-40 high voltage AC/DC test probe extends multimeter measurement capability up to 40,000V peak for low-energy CAT I circuits, delivering accurate high-voltage readings with compatible Fluke meters.