Search results for: 'Instade'

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

ABB Thomas & Betts 7TAA005270R0015 is a Superstrut conduit strap assembly made of 12 gauge electro-galvanized steel for 3 inch rigid or IMC conduit, pipe, and electrical metal tubing.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Allen-Bradley 800T-N40 red replacement cap for 30.5mm push-to-test pilot lights. Designed for Bulletin 800T and 800H operators to restore visibility and control identification.

Allen-Bradley 1336-CONV-SP4A converter power module designed for 1336 series adjustable frequency AC drives. Supports three-phase motor control applications within compatible 1336 drive platforms.

Fanuc JAE A06B-6079-K812 provides a reliable 4-pin right-angle power connection for Fanuc Alpha servo motors, ideal for CNC and industrial automation use.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Amprobe 30XR-A Multimeter: Accurate voltage, current, and resistance testing with VolTect non-contact detection, data hold, and manual ranging.

Fluke CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On Kit – Expand your CertiFiber Pro setup with dual Quad OLTS modules, multimode & single-mode TRC kits, adapters, and hard carry case. Enables Tier-1 fiber loss, length & polarity testing with full reference cords included.

Fluke MFMULTIMODESOURCE MultiFiber Pro Multimode Source – Light source module for MPO fiber testing. Provides 850 nm output for use with the MultiFiber Pro Optical Power Meter to measure loss, polarity, and continuity on multimode MPO trunks.

Promax Tools PS-M-150-LUCU-B OM1 Pouch: High-quality 150m fiber optic cable with LC/UPC to SC/UPC connectors. Durable, reliable, and perfect for seamless connections.

The Fluke Networks DSX-PLA804 CAT 8/Class Permanent Link Adapter is a high-performance solution designed for certifying CAT 8 cabling systems up to 2 GHz. Compatible with the DSX CableAnalyzer series, it ensures precise permanent link testing for data center and high-speed network installations. This adapter supports emerging 25GBASE-T and 40GBASE-T applications, making it ideal for future-proofing copper cabling infrastructure.