Search results for: 'require'

Hubbell HBL7379 Twist-Lock Receptacle supports 50A service at 250V DC and 600V AC in a 3-pole, 4-wire grounding configuration with a black phenolic receptacle body.

Control Devices Style 260 is a 2 in. Dry Link dry disconnect adapter for bulk fluid transfer systems. It serves as the fixed adapter half of a dry disconnect coupling assembly used where controlled connection and separation are required.

Fisher 202-910-0000 Carrying Strap for TW6 offers hands-free shoulder support for better mobility. Designed for easy transport of the TW6 locator across job sites.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

Fluke MP1-MAGNET PROBE 1 magnetic probe tips provide secure hands-free contact for voltage test leads with 4 mm banana connectors, designed for Fluke 1736 and 1738 power quality analyzers.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

Fluke TB25 tool bucket organizer delivers rigid protection and efficient storage with a waterproof hard bottom and 28 pockets. Designed to carry hand tools, meters, and test accessories securely.

Fluke TL28A automotive test leads provide reliable electrical access using wide-jaw alligator clips and a piercing probe. Silicone-insulated red and black leads support accurate automotive diagnostics.

Fluke INLP8 insulated long nose pliers deliver precise gripping and wire cutting with milled gripping zones and a slim jaw profile, designed for controlled work on energized electrical circuits.

Fluke 80BK-A is a Type-K thermocouple temperature probe designed for compatible digital multimeters, enabling accurate surface temperature measurements from −40°C to 260°C using standard shrouded banana inputs.

Pomona 6343 Basic Electronic Test Lead Kit delivers right-angle DMM probes, extended fine tips, and alligator adapters for safe, precise electronic testing across compatible digital multimeters.

Fluke TL27 heavy duty test lead set with red and black safety-shrouded banana plugs, EPDM insulation, and CAT III 1000V rating for reliable digital multimeter and process meter testing.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

The Square D 9007C54A is a heavy-duty industrial limit switch designed for position sensing in automation and machinery applications. It features a rotary actuator with spring return operation, a rugged metal housing, and electrical ratings up to 600 V and 10 A. UL and CSA markings are present on the unit.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

Pomona 6733-0 bare wire control cable features flexible silicone insulation, high strand copper conductor, and CAT III–compliant performance when properly terminated.

Fluke Networks DSX-CHA804 Channel Adapter enables CAT 8 channel testing and certification with DSX2-8000 CableAnalyzer systems.

Fluke Networks GLD-OFP-MOD-M Gold Support provides 1-year maintenance coverage for OFP-MM testers, including calibration, repair, parts replacement, software updates, and 24/7 technical support to reduce downtime.