Search results for: 'systems'

Fluke 117 CAL Multimeter: Compact True-RMS digital meter with non-contact voltage detection, AC/DC measurement, and accurate resistance readings.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

Fisher CCLAMP-5-MF inductive clamp for TW9000 enables non-contact signal transfer. Designed for multi-frequency utility locators, it induces tracing signals onto exposed conductors up to 5 inches.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

Fluke SOL-DMM87V-KIT combines a high-efficiency PV I-V curve tracer with an 87V multimeter and 393 FC clamp meter for solar diagnostics.

Allen-Bradley S50403 driver board designed for 1334 series AC drives, supporting 30–50 HP motor control. This replacement PCB regulates motor speed and torque through controlled voltage and frequency output.

The Fluke 1775 Power Quality Analyzer combines high-speed data capture (1 MHz transient sampling) with automated power-quality measurements, intuitive touchscreen operation, and full three-phase logging—ideal for industrial, utility and renewable energy systems.

The Wöhler VIS 700 HD (7459) is a dedicated chimney inspection camera with a Ø 1.5″ motorized pan-and-tilt HD camera head, self-leveling, and autofocus. Designed for professional chimney and flue inspections with crystal-clear HD imaging.

AEMC 2151.39 is a 45 ft blue guard test lead rated for 15kV and equipped with an integral clip. Designed for use with AEMC Models 6550 and 6555 insulation resistance testers, it serves as a replacement for Cat. No. 2151.22.

The AEMC 2140.63 Test Lead Set pairs 10 ft color-coded electrical leads with red/black alligator clips for 8220/8230 replacement testing setups.

The AEMC 2138.54 Continuity Probe extends continuity testing for compatible AEMC testers and megohmmeters, providing greater reach for electrical maintenance and troubleshooting.

The PENTA ALROC CMF2/40 NP is a 14-40 mm cable preparation kit built for MV cable work, combining the MF2/40 multifunction tool with the ASC40R1 for outer sheath, insulation, and bonded semiconductor removal in one field-ready case.

REES 50702-000 delivers heavy-duty SPST-NC contact control for REES push button operators and selector switches, with screw terminals and gold-plated contacts for dependable circuit switching.

Hubbell 0740-113-36 Deluxe Cord Grip enables secure liquidtight cable entry for .500"–.625" insulated cables with corrosion-resistant stainless steel mesh and oil-resistant sealing.

Hubbell HBL2431 delivers a compact locking plug format for 20A, 3-phase 480VAC connections with 3-pole, 4-wire grounding configuration.

Eaton BPS1 metal protector plate supports box mounting and rough-in electrical installations with one-device plaster ring style construction in the Eaton B-Line series. Lot of 39 pieces.

Allen-Bradley 1492-CABLE025E pre-wired cable delivers a 2.5 m cable assembly for 1746 digital I/O, offering a ready-to-use connection format for compatible automation wiring layouts.

The Eagle Eye GFL-1000-CC is a dual current clamps set for the GFL-1000 Ground Fault Detector & Locator, designed for comparative tracing on parallel conductors and feeders without disconnecting circuits.

Swagelok SS-4BHT-12 is a T Series PTFE-lined stainless steel braided hose assembly with dual 1/4 in. Swagelok tube adapters. It features a 14 in. hose length with 10.2 in. live length and a temperature range of -65°F to 450°F.

The Fluke I17XX-FLEX3KIP/4PK includes four 24 in (60 cm) flexible current probes rated to 3000A AC. Designed for use with Fluke 1742, 1746, and 1748 energy and power loggers, the probes connect directly to compatible 174x series instruments for current measurement display without scaling factors.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.