Search results for: 'integrity disc'

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Rugged waterproof hard case in a 1550-class size with egg-crate lid foam, customizable pluck-foam base, pressure valve, reinforced hasps and dual latches for protecting tools, meters, cameras and electronics.

The INNO Instrument VIEW 3X is an Active V-Groove Cladding Alignment Fusion Splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fibers. This standard OEM kit includes the V12 cleaver and integrated heater, with embedded IoT, GPS, and View Pro Manager cloud connectivity for project and device management.

The INNO Instrument A3 is a clad alignment arc fusion splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fiber types. It features a 4.3-inch color LCD touch screen, active 4-motor alignment, and quick 7-second splice time in SM mode. This new kit configuration includes the V1 fiber cleaver and standard accessories for field deployment.

Olympus OmniScan MX PA32128PR phased array ultrasonic flaw detector with REMCTRL and MGROUP licenses. Rugged 32×128 platform for weld and corrosion inspections.

Rohde & Schwarz FSH-Z14 directional RF power sensor for FSH analyzers, supporting 25 MHz–1 GHz and 30 mW–300 W forward and reflected power with return loss and VSWR measurement accuracy.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

Fluke Ti300 60 Hz infrared thermal imaging camera kit featuring IR-Fusion® image blending, LaserSharp® Auto Focus, 240×180 resolution, and SmartView® software.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The Olympus Omniscan OMNI-MX PA3218PR delivers advanced, high-speed phased array NDT with both remote control interface and multigroup support. Buy certified pre-owned from Cartoli—your trusted NDT partner. Call 18333227865 or chat live for the best deal!

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

Introducing the **Evident Olympus OmniScan X3 32:128PR**, a cutting-edge phased array and ultrasonic flaw detector designed for unmatched performance in industrial inspection applications. This state-of-the-art instrument integrates advanced **FMC/TFM** capabilities, dual UT channels, and the ability to capture up to four simultaneous TFM groups, ensuring superior flaw detection and imaging. With its robust **IP65-rated enclosure**, this portable device is built to withstand challenging environments, making it perfect for weld inspections, corrosion mapping, and pipeline integrity assessments. The **10.6-inch resistive touch display** ensures clear, high-resolution imaging, while 64 GB internal SSD storage provides ample space for your data needs. Elevate your inspection capabilities with the comprehensive package that includes a **rechargeable battery**, AC adapter, wireless adaptor, and essential accessories. Get ready to redefine precision in ultrasonic testing with the **Evident Olympus OmniScan X3 32:128PR**. **Cost:** $45,001.11 **Condition:** New **Stock Status:** In Stock **Estimated Delivery:** 3 days