Search results for: 'martin'

Honeywell R4138D 1016 flame safeguard control designed for industrial burners and boilers. Provides supervised ignition sequencing, flame monitoring, and safety shutdown on flame failure.

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

Schroff 20800-199 measuring adapter card enables configurable signal routing and interface mapping across Eurocard-based systems using integrated switch matrix architecture.

Yamatake-Honeywell J-DIM00 is a DC 24V digital input module for AMC automation systems, enabling reliable field signal monitoring and seamless integration with compatible industrial and marine control platforms.

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Used Waygate 57K0204P1 90° shear wave angle beam wedge engineered for precision ultrasonic testing with 0.50" transducers. Perfectly suited for high-accuracy weld inspections, pipe evaluation, and specialized material testing. Fully tested and ready to deploy.

Easy-Laser Case 3 shim kit with Types A/B/C/D, 0.05–2.00 mm stainless steel shims, permanently marked and burr-free. Foam-organized case for precise machine alignment setups.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The INNO Instrument UN1CO Shoulder Strap is an accessory component for the UN1CO mobile workstation system. Designed for integration with the UN1CO work tray, it supports hands-free transport and stabilization of fiber optic splicing equipment during field deployment. This listing includes the shoulder strap only.