Search results for: 'vac'

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

Allen-Bradley 1771-IAD digital input module delivers 16 channels of 120V AC/DC signal monitoring for PLC-5 systems, enabling reliable connection of switches, relays, and discrete field devices.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

Siemens 75D70550004 magnetic coil supports D.P. Model F contactor replacement with dual-voltage operation at 380–440V 50 Hz and 440–480V 60 Hz.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

Honeywell 620-0041 processor power supply module providing 115/230 VAC input and 8 A capacity for PLC system power distribution.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

Allen-Bradley 1492-UF824 fusible terminal block provides compact DIN-rail circuit protection with LED blown-fuse indication for low-voltage AC/DC control and PLC applications.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

AEMC 6611 Phase & Motor Rotation Meter: Identify phase order, motor direction, and live/open phases on 3-phase systems. Ideal 6609 replacement.

AEMC 6292 Micro-Ohmmeter: Portable low-resistance tester with 200A current, precise measurement, and DataView software for efficient reporting.

The Conair UTB-120S Universal Terminal Box is a centralized electrical connection point used in material loading systems. It operates on 120 VAC and is designed to interface a main loader control panel with multiple receiver or loader drop cables, simplifying system wiring and maintenance.

Toshiba VFS11-4015PL-WN VF-S11 transistor inverter for 3-phase AC motor control. Rated 2 HP with 380–500 V input/output and 0.5–500 Hz output frequency range.

Allen-Bradley 1771-IAD PLC-5 digital AC/DC input module with 16 channels and 120V category support. Designed for interfacing discrete field devices in 1771 I/O chassis. Reliable signal detection for industrial control systems.

Tele Controls RM024LD relay delivers reliable 24VDC switching with LED status and diode protection, ideal for RM series industrial control and automation systems.

AEMC C.A 773 Voltage Tester: LED and backlit display, voltage absence test from 12VAC-1000VAC, continuity, phase rotation, and stray voltage detection.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Allen-Bradley 1492-CB1-H010 supplementary protector delivers 1-amp single-pole thermal-magnetic overcurrent protection for industrial control circuits using DIN rail mounting.