Search results for: 'installed'

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The PLS 3G KIT is a self-leveling 3-point green laser level designed for fast plumb reference layout. It projects up, down, and forward points with ≤1/8 in accuracy at 30 ft and includes mounting accessories for floor, wall, and magnetic attachment applications.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Banner BT23S is a bifurcated, diffuse-mode glass fiber optic cable with a 3.2 mm bundle diameter and stainless steel monocoil sheathing. Designed for harsh industrial environments, it supports reliable sensing in high-temperature and electrically noisy applications.

Fluke Networks FTK1200 is a SimpliFiber Pro multimode fiber verification kit with VisiFault. The kit includes an optical power meter, 850/1300 nm multimode source, FindFiber Remote ID source, magnetic straps, adapters, and a carrying case.

Fluke Networks REMOTEID-KIT enables fast remote cable identification with MicroScanner PoE testers. Includes numbered IDs #2–7 for tracing RJ45, Ethernet, telephone, and CATV cabling layouts.

Fluke Networks SRC-9-SCFC-KIT singlemode test reference cord kit delivers accurate fiber loss measurements for FC-terminated links using reference-grade SC/FC and FC/FC cords designed for professional fiber testing.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Banner Engineering BAT2.53S is a BAT Series glass fiber optic sensor with diffuse sensing mode and a right-angle threaded sensing tip. It features a stainless steel monocoil sheath, brass sensing end, 4 mm core diameter, and 0.914 m fiber length for demanding industrial sensing environments.

Fluke IKPL3 insulated pliers kit delivers 1000V-rated hand tools for electrical work, combining long nose pliers, diagonal cutters, and linesman pliers forged from German CMV steel for durability and secure grip.

Fluke T110 two-pole voltage and continuity tester delivers reliable AC/DC voltage detection with switchable load, audible and vibrating indicators, and high safety ratings for electrical verification tasks.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.