Search results for: 'caused'

Looking for a reliable solution to protect your CCT and CKT scales from damage caused by liquids and other wet materials? Look no further than Adam Equipment's In-Use Wet Cover. Designed specifically for CCT and CKT scales, this cover provides a protective barrier against moisture, helping to prevent damage and maintain the accuracy of your weighing results. Made from durable materials, this wet cover is built to withstand frequent use in wet or humid environments. Choose Adam Equipment's In-Use Wet Cover for a dependable and effective solution to protect your CCT and CKT scales.

Protect the CB from dust and spills with this disposable in-use cover. Keeping your balance clean increases its longevity and reduces the need for costly maintenance. The cover is see-through, which allows the user to operate the balance with no limitations.

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Flir E75-14 Thermal Imaging Camera with High-Resolution and Self-Calibrating Interchangeable 14 Degree Lenses is the newest cutting-edge thermal imaging technology from Flir, providing high sensitivity and resolution in an intuitive handheld design with high-performance features and wireless communication. Powered by a high-performance CPU, this camera delivers 320 x 240 thermal resolution that’s crystal clear, yet affordable while offering powerful functionality at no cost to you.

The Ti200 infrared camera delivers the flexibility and performance to allow you to stay on top of innovation, whether it's through industrial or commercial applications. You'll be able to spectrum analyze, detect heat and radiation level variations, or use it for industrial process control — all with wireless speed and ease. And, since it's future-ready, no matter what comes next for your business, so long as you have an infrared camera on hand, you'll be ready.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DTX-MFM2 fiber module are used with a DTX Series Cable Analyzer to test and certify fiber optic cabling installations. 

The Viavi OLS-36V2 (2334/21) SmartPocket V2 Optical Light Source is a durable and compact device used for performing insertion loss measurement and continuity checks in the field. It is designed to be user-friendly and convenient, allowing for easy and quick testing of both single mode and multimode optical fiber networks. This device is best used in conjunction with the OLP-3xV2 optical power meters, which are sold separately. The SmartPocket V2 source is equipped with Auto-λ and Multi-λ functions that work with any SmartPocket V2 power meter, allowing for a cost-effective solution for testing and troubleshooting optical fibers in the field. Its one-button operation ensures a fast, straightforward, and mistake-free testing solution, making the SmartPocket OLS-36V2 the perfect tool for daily field testing.

Megger DLRO10HD Product Overview

Product Description

Product Overview

Product Overview

The CFP2-100-Q CertiFiber Pro Quad Optical Loss Test Set (OLTS) helps cabling professionals accomplish more than ever and comes with a Wi-Fi adapter for wireless connectivity to Fluke Networks LinkWare Live software. It's all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster.

Thermo Scientific Niton XL2 800 XRF is a lightweight, rugged, easy-to-use by non- technical personnel handheld instrument perfectly matched for most testing applications.  It is equipped with an integrated camera for image acquisition.  This instrument is also sealed against moisture and dust.

VIEW5 PRO’s 5-inch high-resolution color LCD touch screen with user-friendly intuitive GUI (Graphic User Interface) offers large and clear fiber images to users. By double-tapping the screen, users can Zoom In & Out the image to the world’s highest magnification of 520x. The fusion splicer is equipped with bua ilt-in IoT module that connects to the INNO’s View Pro Cloud Management System for real-time operation and management online. This innovative cloud-based solution is designed to create the most advanced and yet most uncomplicated splicing and work experiences ever.

The 170ADO53050 is a Discrete Solid State I/O Base used in Modicon Momentum automation platform modular in design. The communication adapters and processor adapters are designed to work as functional modules when they are snapped onto a Modicon Momentum I/O base. This I/O base requires that some type of Modicon Momentum adapter be attached before it can be functional. I/O bases fit into compact standard housings that can be mounted on a DIN rail or on panels in a cabinet. It read information from field sensing devices and control discrete and analogue field actuating devices. Terminal blocks and bus bars are available for use with the bases so that this base can be used to support 2, 3 and 4-wire field devices. I/O field devices and the power supply to the module are connected via three 18-pin terminal blocks and an optional 1, 2 or 3-row busbar. This I/O base supports the rest of the control system.