Search results for: 'define'

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

Turck NI10-G18SK-RZ3X2 55MM inductive proximity sensor with 10 mm rated switching distance. Non-flush M18 threaded design with chrome-plated brass housing. Supports 20–250 VAC or 10–300 VDC operation using a 2-wire NC output. Terminal chamber connection with IP67 protection.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

Fluke 922 Airflow Meter measures HVAC pressure, velocity, and airflow with bright display, color-coded hoses, and precise 0.001 in H2O resolution.

Digi-Pas DWL-200 Torpedo Digital Level delivers fast digital angle and slope measurement with 0.1° resolution, alternate zero, inverted display, self-calibration, and magnetic hands-free positioning.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

The GE Fanuc IC660BBR101 is a Genius I/O relay output block providing 16 normally open relay outputs. Designed for distributed control systems, it supports 115/230 VAC block power, individual output status LEDs, and compatibility with a wide range of low-power AC and DC control devices.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

Allen-Bradley 800T-N26G green pilot light replacement cap for 30mm Bulletin 800T and 800H pilot lights. Designed for field replacement or completing assemblies without color caps.

Fluke CFP2-Q-ADD-R CertiFiber Pro Quad OLTS kit enables fast fiber loss testing, dual-wavelength measurement, and automated Pass/Fail analysis for accurate certification.

ETRI 148VK0282072 axial AC fan rated 115V AC, 50/60Hz, single-phase. Zamak housing with plastic impeller (UL 94 V0) and ball bearings. Thermally protected motor. 172 × 150 × 38 mm form factor with 305 mm leads (AWG20).

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

The Thermo Scientific Niton XL3t Series is a handheld XRF analyzer platform offered as a configurable, quotable solution. Final instrument configuration is determined by selected model and analytical application. Capabilities, performance characteristics, and included features vary by configuration and are defined at the configured product level.

AEMC 2135.71 AC Current Probe delivers MN82 current measurement for AEMC 6471/6472 ground resistance testing, including selective and stakeless ground electrode workflows.

Hubbell HBL4720C Twist-Lock Plug delivers 15A, 125V AC L5-15P locking power connection with black/white nylon Insulgrip construction and 2-pole, 3-wire grounding.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

The Schneider Electric GV3P40 is a TeSys Deca motor circuit breaker designed for motor protection applications. This 3-pole device features a thermal-magnetic trip unit with an adjustable thermal protection range of 30 to 40 A and a rated current of 40 A. It supports AC networks up to 690 V at 50/60 Hz and provides defined short-circuit breaking capacities in accordance with IEC 60947 standards.

The Emerson KJ2003X1-BK1 SD Plus Controller is a DeltaV series industrial automation component designed for distributed control applications. It supports 12 VDC local bus power at 75 mA and 24 VDC bussed field power at 150 mA, with 24 VDC field circuit at 5 mA per channel. The controller operates in ambient temperatures from -40°C to +70°C and supports industrial vibration and shock tolerance ratings.

Fluke FLK-A3001FC KIT delivers wireless multimeter and iFlex current measurement with logging, remote monitoring, and seamless Fluke Connect integration.

AEMC 6418 Clamp-On Ground Resistance Tester: Fast, clamp-on testing with memory, alarm, and no auxiliary rods—ideal for reliable earth measurements.

Leviton 165-4729-C delivers 15A, 125V NEMA L5-15R locking connectivity with industrial-grade grounding, brass contacts, nylon construction, and 18–10 AWG terminal accommodation.