Search results for: 'mounts'

The Yamatake Honeywell J-MBU00 is a modular base unit designed as a physical mounting and backplane chassis for compatible control or I/O modules. This unit provides slot-based connectivity within a larger industrial automation system. Delivered as the base unit only.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

Fluke 810SMP Mounting Pad securely holds vibration sensors for precise 810 tester measurements—ideal for automotive and machinery diagnostics.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.

Thomas & Betts Red Dot 2CCD weatherproof two-gang duplex receptacle cover delivers die-cast metallic protection for dual duplex outlets with gasketed sealing and device-mount installation.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

Allen-Bradley 1771-A3B1 PLC-5 12-slot I/O chassis provides reliable backplane communication and power distribution for 1771 modules in panel-mounted industrial control systems.

Hubbell WP8M weatherproof 1-gang outlet box hood provides protective coverage for vertical electrical box installations with a hinged gray cover and gasketed weather-resistant design.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Allen-Bradley 800E-3X10 is a latch-mounted normally open contact block for 22.5 mm 800E pilot devices, delivering reliable 10A switching for industrial control and signaling circuits.

Eaton FA20 auxiliary contact block adds 2NO contacts to XTMCX contactors and XTRM relays, offering reliable control signaling and easy front-mount installation.

The Leviton 020-86001 is a standard-size 1-gang toggle switch wallplate made from durable thermoset plastic with a smooth ivory finish. Designed for traditional toggle devices, it offers resistance to fading, discoloration, grease, oils, moisture, and scratches, and includes color-matched metal mounting screws.

Allen-Bradley 1734-MB 95723404 Series A mounting base delivers secure DIN-rail installation for POINT I/O modules, with keying and POINTBus connections for reliable setup.

Fluke 805ES external vibration sensor enables precise measurements in tight or hard-to-reach areas with rugged, low-profile design and magnet mount.

The Leviton 001-85001 is a 1-gang toggle switch wallplate made from durable thermoset plastic. This standard-size wallplate is brown in color and designed for device mounting. It resists fading, discoloration, grease, oil, organic solvents, and moisture scratches, and includes mounting screws.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

Allen-Bradley 1326AB-MOD-M6-C1 is an M6 encoder mounting adapter kit designed to install an 845H encoder onto 1326AB series motors, delivering secure mechanical feedback integration in industrial motion systems.

BROSA EBM 6111 load cell delivers 100 kN force measurement for felt tension control and industrial monitoring, with a flange-mount design and integrated cable for fixed installation.

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.