Search results for: 'environments'

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

Fluke AC283A plunger-style pincer clip set designed for TL222 and TL224 test leads. Provides steady, secure electrical contact with a flexible insulated shaft and nickel-plated pincers for reliable measurements.

Fluke Networks ADP-MMC12TO32-1A MMC adapter coupler for verification and inspection of 12, 16, 24, and 32 fiber APC MMC cables when used with compatible Fluke Networks fiber test systems.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Honeywell 620-1690 is a processor rack chassis used in the legacy IPC 620 / ISSC 600 PLC system. It provides the physical backplane and power distribution framework for processor, I/O, and communication modules in rack-mounted industrial control installations.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

Fluke Networks VisiFault Visual Fault Locator (VFL) – Quickly pinpoint breaks, bends, and faulty connectors in fiber optic cables. The bright red laser makes defects easy to see for fast troubleshooting and verification.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

Pomona 5519A replacement DMM test lead set designed for sheathed banana inputs on Fluke, HP, Tektronix, and Wavetek meters, featuring high-flex silicone wire, dual insulation, and IEC 61010 compliance.

Pomona 4911A-36-2 retractable sheath banana plug patch cord delivers secure 4 mm connections with insulated safety design. Ideal for electrical test setups requiring flexible 36-inch leads.

1 x Pomona 2249-C-24 BNC Male to Male Antenna Cable (2 ft)

Pomona 3957 adapter cable converts BNC female connections to multi-stacking banana plugs with molded durability, gold-plated contacts, and PTFE dielectric.

Pomona 2249-C-60 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona 2249-C-96 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Amprobe UAT-620 Underground Locator enables safe CAT IV 600 V tracing of energized and de-energized utilities with depth measurement up to 20 ft.

Fluke Networks OFP2-200-SI OptiFiber Pro HDR OTDR delivers fast, automated singlemode fiber testing at 1310 and 1550 nm with SmartLoop and WiFi.

Fluke Networks GLD-CFP-100-M Gold Support delivers one-year OEM maintenance for CFP-100-M testers, including calibration, repairs, loaner units, parts replacement, and 24/7 technical support.