Search results for: 'provides'

Allen-Bradley 1492-CABLE025E pre-wired cable delivers a 2.5 m cable assembly for 1746 digital I/O, offering a ready-to-use connection format for compatible automation wiring layouts.

Bently Nevada 330102-00-40-10-02-00 proximity probe cable assembly for 3300 XL 8 mm monitoring setups, built for proximity measurement connection in machinery monitoring systems.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

B-Line B2010 conduit hanger strut clamp secures 1-inch conduit to standard strut systems with a durable two-piece steel design. Supports reliable pipe mounting with secure fastening and corrosion-resistant zinc finish.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The Fisher 8COIL-M97 8" DD search coil for M97 offers high sensitivity to small targets and better separation. Ideal for locating valve boxes, manholes, and survey markers in tough ground conditions.

Fisher TW9KTX-CHGR is a lithium-ion charger kit for the TW9000 transmitter. It charges TW9KTX-BATT batteries via an AC-powered cradle, ensuring reliable, field-ready operation.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The Fluke I40S-EL3X/3PK Clamp-On Current Transformer 3 Pack is designed for low current measurement applications up to 40 A. Each transformer measures accurately on 1 A and 5 A secondary current transformers and clamps onto conductors up to 15 mm in diameter.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

Fluke FPC3S-FLUKE-700GA-1 is a 3-Year Premium Care Standard Plan for Fluke 700G gauges. Coverage includes annual calibration or performance test, accidental damage and repair, expedited calibration and repair, expedited freight, replacement of damaged accessories, software updates, and priority technical support. No loaner equipment included.

The PLS 180G RBP KIT is a self-leveling green cross line laser level designed for layout and installation tasks. It provides ≤1/8 in accuracy at 30 ft with 180° horizontal and 130° vertical fan angles. The kit includes a rechargeable battery pack, alkaline battery pack, magnetic L-bracket, and universal wall/ceiling bracket.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

The PLS PLS 5R KIT 5-Point Red Laser Kit is a self-leveling five-point red laser level designed for plumb, level, and square horizontal and vertical point layout. It features a durable pendulum lock platform with tilt mode functionality and delivers accuracy of ≤1/8 in at 30 ft (≤3 mm @ 10 m). The kit includes a floor stand, magnetic L-bracket, pendulum target, red reflective target, battery pack, and carrying pouch.

The PLS 5R is a self-leveling five-point red laser level designed for layout, alignment, and squaring tasks. It projects plumb, level, and square reference points and features a pendulum lock for transport and tilt mode operation. Supplied as a bare tool with pouch and battery pack.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Allen-Bradley 700-HK36A1 is a Bulletin 700-HK slim line plug-in relay with a 120V AC coil and SPDT contact configuration. It supports up to 16 A resistive loads and is designed for high-density industrial control and interposing applications.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

Fluke Networks FTK1200 is a SimpliFiber Pro multimode fiber verification kit with VisiFault. The kit includes an optical power meter, 850/1300 nm multimode source, FindFiber Remote ID source, magnetic straps, adapters, and a carrying case.