Search results for: 'models'

Fluke Networks D914S is a professional SoftTouch impact tool with EverSharp 66 and 110 blades, delivering precise punchdown terminations with adjustable impact force, built-in hook, spudger, and torque capability.

Fluke Networks TRC-SM-VERIFY-MPO12P is a reference-grade single-mode MPO12 verification cord for CertiFiber Max systems, ensuring accurate reference validation for pinned MPO Type A fiber testing.

Fluke T6-KIT accessory starter kit enhances Fluke T6 Electrical Tester usability with an OEM holster, AC285 alligator clips, and TPAK hanging kit for secure, hands-free electrical testing.

Fluke T110 two-pole voltage and continuity tester delivers reliable AC/DC voltage detection with switchable load, audible and vibrating indicators, and high safety ratings for electrical verification tasks.

Fluke 59 MAX+ infrared thermometer delivers fast, non-contact surface temperature readings with a 10:1 distance-to-spot ratio, laser targeting, and backlit LCD for reliable diagnostics.

Fluke Networks D814 Impact Tool delivers consistent telecom punch down performance with adjustable impact control and included Eversharp 110 and 66 blades for clean, reliable wire terminations.

Fluke TLPV1 MC4 to 4mm test lead set enables safe, accurate measurements on MC4-connected solar PV systems using 4mm banana plug instruments, with included MC4 disconnect tool.

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

Fluke TL910 electronic test probes deliver precise access to hard-to-reach test points using ultra-fine 1 mm tips, 1 m leads, and replaceable probe tips for flexible electrical testing applications.

Pomona 1756-24 Shielded Low Voltage Spade Lug Patch Cord supports precision microvolt and nanovolt measurements using gold-plated ETP copper spade lugs and a shielded 24-inch cable to minimize thermal EMF and signal interference.

Fluke 80PK-1 Type K beaded thermocouple probe delivers fast-response air and surface temperature measurement using a miniature connector. Designed for general-purpose diagnostics with compatible Type K instruments.

Fluke PM9082/001 dual banana jack to male BNC adapter set enables secure conversion between 4mm banana leads and BNC inputs for test and measurement applications up to 600V.

Fluke AC283A plunger-style pincer clip set designed for TL222 and TL224 test leads. Provides steady, secure electrical contact with a flexible insulated shaft and nickel-plated pincers for reliable measurements.

Fluke Networks ADP-MPO16/32-A MPO adapter coupler for verification and testing of 16 or 32 fiber APC MPO cables, designed for reliable connection, inspection, and use with CertiFiber Max systems.

Fluke Networks ADP-MMC12TO32-1A MMC adapter coupler for verification and inspection of 12, 16, 24, and 32 fiber APC MMC cables when used with compatible Fluke Networks fiber test systems.

Pomona 3752 shielded miniature aluminum box with integrated BNC male-to-female connector. Designed for 50-ohm signal routing, shielding, and test circuit enclosure in RF and instrumentation setups.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

Fluke TP175E TwistGuard Test Probes provide adjustable 2mm probe tips with integrated 4mm adapters, delivering safety-rated electrical testing for multimeters while minimizing exposed metal during measurements.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.