Search results for: 'class'

INNO Instrument PTB01 is a single-phase wiring test adapter box used for switching single-phase circuits to support power coefficient measurement and related electrical testing workflows.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

Fluke 700G07 Pressure Calibrator delivers fast, precise measurements from ±10 inH2O to 10,000 psi with rugged, field-ready durability.

Fluke Networks DSX2-8000-PRO CableAnalyzer Kit – Complete copper and fiber certification system. Certifies Cat 8/Class I & II copper with Level 2G accuracy plus Tier-1 multimode/singlemode fiber using Quad OLTS. Includes FiberInspector probe.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

Vega D5.1/2.N Ex d Stopping Plug seals unused 1/2-14 NPT entries in hazardous-area enclosures with nickel plated brass construction, flush external installation, and certified flameproof protection.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.

Introducing the **Fluke Networks DSX2-8000-NW Versiv 2 Cable Analyzer 2 GHz Copper Certifier**, the ultimate tool for professional installers, technicians, and network engineers. Designed for exceptional performance with Cat 5e through Cat 8/Class I/II cables, this state-of-the-art analyzer ensures accurate copper cabling certification, significantly reducing troubleshooting time and simplifying project management. Key features include ultra-fast certification—completing full Cat 6A tests in just 8 seconds—along with the innovative ProjX™ Management System for seamless multi-team project handling and LinkWare™ Live cloud integration for real-time project oversight from anywhere. With high accuracy testing compliant with ANSI/TIA-1152 Level 2G and IEC 61935-1 Level VI standards, and detailed diagnostic capabilities, the DSX2-8000-NW guarantees quick fault isolation and superior reliability. Invest in your efficiency with the Fluke DSX2-8000-NW and ensure your network installations meet the highest standards. **In Stock Now!** *Estimated delivery: 2-4 weeks.*

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

INNO SPAW7000 Power Analysis Wavecorder with up to 7 power channels and 2 motor channels, supporting DC–5 MHz bandwidth, harmonic analysis to the 500th order, and high-accuracy power measurement.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Allen-Bradley 140M-C2E-C20 motor protection circuit breaker delivers adjustable 14.5–20A thermal overload and fixed magnetic short-circuit protection for three-phase motors in IEC and UL applications.

Fluke 1748/30/EUS captures waveform, transient, and harmonic data with Class A accuracy and 3000A iFlex probes for advanced three-phase power quality analysis.

The Fluke Networks DSX2-CFP-Q-ADD-R add-on kit includes dual DSX-5000 copper certification modules, quad OLTS fiber modules, and a Versiv 2 remote. It expands your Versiv certification system to handle both high-performance copper (Cat 6A/Class EA) and fiber loss/length testing in one streamlined workflow—ideal for full-scope network certification.

Fluke DSX2-8000MI CableAnalyzer Kit – Certifies Cat 8/Class I & II copper with Level 2G accuracy and performs Tier-1 multimode fiber testing with CertiFiber Pro OLTS. Versiv platform ready for future expansion.

Fluke DSX2-5000 CableAnalyzer – Certifies Cat 5e, 6, 6A, and Class EA copper cabling up to 1 GHz with Level V accuracy. Built on the Versiv™ platform for fast, standards-compliant network certification and LinkWare™ Live reporting.

HI-LINE Grounding Set: High-quality 10kA fault current rated set with durable copper cable and bronze clamp. Reliable, efficient grounding for industrial use.