Search results for: 'compatible'

The INNO Instrument E-70 fusion splicer electrodes are official replacement components designed for compatibility with INNO View Pro, Ribbon, and X Series splice machines. Rated for up to 5,500 splices per set, they support stable arc discharge performance and scheduled maintenance intervals.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

Fluke AC220 SureGrip alligator clips provide insulated, high-voltage test lead connections for electrical measurements. Designed for use with TL222 and TL224 leads, offering secure gripping on conductors and terminals.

Wohler 3854 VIS Centering Star keeps compatible VIS 2xx, 3xx, and 4xx inspection cameras centered for steadier movement and clearer visual inspection through pipe runs.

Wohler Car Charger for VIS 200, VIS 300, and VIS 400 cameras delivers vehicle-based charging in a compact, travel-ready format for dependable power on the go.

AEMC 2153.78 USB Wall Plug Adapter replacement for models L452, 1510, MH60 and compatible with multiple test equipment series.

Fluke TPS VOLTPROBE 1K V voltage probe supports up to 1000 V measurements for Topas 2000 and Model 1760 power quality applications.

AEMC 2151.32 5kV Safety Test Lead Set provides three color-coded 25 ft leads with integral hippo clips for insulation resistance testing applications. Designed for use with compatible AEMC megohmmeters operating up to 5kV.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

Eaton FG51-220 coil and feeder group restores reliable operation in GH-series modular contactors, offering a precise 240V replacement for maintenance and repair needs.

The Emerson Ovation 5X00241G02 Processor Module is an industrial control system component designed for integration within Ovation distributed control system architectures. Identified by model number 5X00241G02, it functions as a processor module within compatible Emerson Ovation platforms.

The Fluke Networks DSX-AXTERM Link Terminator set includes two alien crosstalk link terminators designed for use with compatible DSX series platforms. These terminators provide crosstalk protection and are supplied as a packaged quantity of two units.

AEMC 5000.56 Fuse delivers reliable 500mA, 3kV protection, designed for models 5050, 5060, 5070, and 6505 test equipment.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Used Sonatest MB4TLF, 4 MHz twin crystal compression probe for flaw detection in castings and thickness surveys. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

Fluke Networks S2 GUIDE MDC FEMALE enables accurate inspection of recessed female MDC connectors using FI-3000 or FI-1000 inspection cameras.

Fluke Networks FI1000-MPO-XY-UTIP: High-precision multi-row probe for patch cords and bulkheads, compatible with Fiber Inspector Pro.

Fisher SONDE-512 transmitter emits a 512 Hz signal to trace non-metallic pipes and ducts. Designed for push-rod use, it works with line tracers to locate pipe paths and underground blockages.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

Wöhler 3857 Guidance Weight improves camera head stability and directional control in pipe inspections, helping compatible Wöhler systems move more smoothly through bends, offsets, and vertical runs.

AEMC 2152.17 delivers a color-coded red and black screw-on pencil probe set rated 1000V CAT IV for compatible electrical test lead setups.

INA SRMC 3-A 300 cm signal lead cable supports SRM electronic measurement system connectivity with a rugged cable assembly for precise bearing measurement setups.

The Telemotive E7160-101 Radio Remote Control Receiver Module is a board-level component used within compatible Telemotive industrial radio control receiver assemblies. It functions as a receiver module in fixed-station radio control systems for industrial equipment integration.