Search results for: 'good d'

Hilti PS 1000 X-Scan Concrete Scanner Kit with PSA 100 Monitor delivers fast GPR-based concrete scanning, embedded object locating, and 2D/3D scan review for confident drilling, coring, and cutting preparation.

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

The AFL FuseConnect SC FUSE-SC9SMA-6 APC is a high-performance, field-installable single-mode connector designed for 900 µm fiber. This fusion splice-on connector features a pre-polished ferrule for easy installation without crimping, ensuring low insertion loss and optimal signal integrity. Ideal for use in FTTP networks, data centers, and telecommunications, the SC/APC design provides reliable connectivity and superior performance in demanding environments.

Compact size, similar to iPhone Autoranging function True-RMS measurement Overload protection Large LCD Includes test leads Display 3 5/6 DC Voltage (V) 6V/60V/600V ±(0.8%+5d) AC Voltage (V) True-RMS 6V/60V/600V ±(1.0%+5d) DC Current (A) 1000mA/10A ±(2.0%+5d) AC Current (A) True-RMS 1000mA/10A ±(2.0%+5d) Resistance (Ω) 600Ω/6K/60K/600K/6M/60MΩ ±(1.0%+5d) Capacitance 6nF/60nF/600nF/6μF/60μF/600μF/6mF/100mF ±(4.0%+5d) Temperature -4°F~986°F ±(3%+5d) / -20°C~530°C ±(3%+5d) Frequency 1000Hz/6KHz ±(2.0%+5d) Safety CATII 600V Battery 1.5V AAA x 2

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

Fisher M101 rebar locator with 4.5 kHz Double D coil delivers precise concrete scanning to locate reinforcing bar, conduit, and embedded metal with meter and audio indication.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Used Sonatest PMAP505045, 5 MHz 0.5" 45° angle beam probe for weld inspection and flaw detection. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

Honeywell Kromschroder UVS 10D2 UV Burner Sensor w/ quartz guard, 1/2" NPT. High-reliability UV flame proofing for industrial furnaces and boilers, EN 298-compatible.

Certified pre-owned Sonatest T1-37W0D 1 MHz 37 mm twin compression membrane transducer with Microdot connector. Delivers wide coverage and deep penetration for flaw detection and corrosion mapping.

Certified pre-owned Sonatest T1-25.4T6"D 1 MHz 1" twin compression membrane ultrasonic transducer with top-exit Microdot connector. Designed for deep flaw detection and large-area NDT assessments.

INNO View 7 Fiber Splicing Machine: Fast, precise splicing with 355 cycles per charge. Quick 7-sec splicing, compact design, and reliable performance for FTTx networks.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

Fluke Networks 10055000 D814 impact tool delivers reliable telecom punchdowns with adjustable impact settings, EverSharp 66 blade, and industry-standard durability.

Fluke D814 Punchdown Tool: Durable telecom impact tool with adjustable spring, blade storage, and precise low/high impact wire termination.

Snap-On Apollo D8: Quick, accurate diagnostics with an 8" touchscreen, Wi-Fi, and Intelligent Diagnostics. Boost productivity and tackle challenges with ease!

Upgrade your fiber testing with the Viavi FIT-82P01-PRO OLP-82P SM/MM Optical Power Meter & Fiber Inspection Kit! Get fast, accurate results with integrated inspection and automated pass/fail analysis-perfect for any network professional.Order now and streamline your fiber inspections!

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

Used Sonatest PDED50505, 5 MHz 1/2" twin element compression wave ultrasonic transducer for reliable flaw detection and thickness gauging on corroded or coated materials. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.