Search results for: 'model'

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

Fluke Networks CFM-TRC-S-MPO24U CertiFiber™ Max Test Reference Cord Set for testing single-mode MPO 24 pinned cables. Includes one main and one remote reference cord. Designed for use with the CertiFiber™ Max Optical Loss Test Set and supports standards-preferred one-jumper reference method.

Fluke I17XX-FLEX6000/3PK iFlex flexible current clamp kit includes three 36 in flexible Rogowski-style probes rated to 6000 A AC. Designed to connect directly to Fluke 173X Energy or Power Loggers, the probes provide expanded AC current measurement capability without external scaling factors.

The Fluke I17XX-FLEX3000/4PK includes four 24 in iFlex® flexible AC current probes rated to 3000 A AC. Designed for use with Fluke 17XX Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument and feature 1.8 m output cables for measurement flexibility.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

The Fluke Networks DSX-CHA003 DSX Series Coaxial Adapter is designed for use with the DSX-5000 CableAnalyzer to characterize installed coaxial cabling. It supports testing of 50 ohm, 75 ohm, and 93 ohm coaxial cable and enables insertion loss measurements over a frequency range of 5 to 1002 MHz in accordance with applicable test limits.

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke 62 MAX CAL infrared thermometer delivers non-contact temperature measurement with a 10:1 distance-to-spot ratio, IP54 protection, single-laser targeting, and traceable calibration data for dependable industrial diagnostics.

Fluke Networks SRC-9-SCLCAPCKIT-M single-mode 9 µm test reference cord kit with metal LC/APC connectors, designed for accurate optical loss testing and seamless use with CertiFiber Pro fiber testers.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

Fluke FTP17XXPQ fused test probe set delivers secure voltage indication for three-phase power quality testing, using 11A fused probes and AC285 alligator clips designed for Fluke analyzers and loggers.

Fluke i17XX-FLEX3000 flexible iFlex current clamp measures up to 3000A AC and connects directly to Fluke 17XX Energy and Power Loggers, delivering accurate high-current measurement in tight spaces.

Fluke Networks TRC-SM-VERIFY-MPO24P is a reference-grade single-mode MPO24 verification cord for CertiFiber Max optical loss testing, ensuring accurate reference validation with pinned MPO24 fiber links.

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

Fluke CO-205 Aspirator Kit enables clean flue gas sampling for CO measurement with Fluke CO-210 and CO-220 instruments, using a hand-operated aspirator and stainless steel probe for reliable readings.

Fluke TRC-SM-VERIFY-MPO24U is a reference-grade single-mode MPO 24 verification cord for CertiFiber™ Max testing, ensuring accurate reference setup when testing unpinned MPO fiber links.