Search results for: 'class'

Fluke Networks DSX-5000 Cable Analyzer: Fast, reliable certification for Cat 6A and fiber cables. Modular design, accurate results, and built for tough job sites.

Fluke 435-II power quality and energy analyzer for Class A three-phase testing, with PowerWave capture, transient analysis, harmonics, flicker, mains signaling, energy loss measurement, and power distribution troubleshooting.

Square D 9001 TS-1 selector switch operator delivers 2-position manual control for industrial panel systems requiring reliable mechanical switching input.

INNO Instrument SCTX60 current sensor with 0-60A DC range, 60Apeak AC range, DB9 connection, 28 mm aperture, and DC-800 kHz measuring bandwidth for precision current measurement applications.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

INNO Instrument SCTH60 current sensor with 0–60A DC range, 60Apeak AC range, 28 mm aperture, DB9 connector, and DC to 800 kHz bandwidth for precision current measurement.

INNO Instrument SBT300 battery internal resistance tester for measuring battery resistance and voltage up to 300V. Includes BZ-1001 zero setting panel, BL-1001 pin test line, BL-1002 clip test line, and installed LAN/RS-232C, analog output, and EXT I/O interfaces.

INNO Instrument SPA1000 digital power meter with 1 power channel, AC/DC measurement, 100 kHz bandwidth, up to 1000 V and 20 A input, 4-item LED display, and harmonic measurement to the 100th order.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

Fluke DSX2-8000QOI Versiv 2 Cable Analyzer delivers ultra-fast Cat 8 copper certification and integrated fiber OTDR/OLTS testing for mixed media networks.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.

Temperature range: -58°F ~ 1076°F (-50°C to 580°C) Emissivity adjustable: 0.10 to 1.00 Distance spot ratio: 16:1 Resolution: 0.1°C / 0.1°F Temperature Range -50°C~580°C(-58°F ~1076°F) Accuracy ±2°C or ±2%°C/td> Distance Spot Ratio 16：1 Emissivity 0.1~1.0 Laser class Class II ,

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

INNO Instrument SPA3000 digital power meter with 3 power channels, up to 1000 V measurement, DC to 100 kHz bandwidth, and 4-item LED display for voltage, current, and power measurement.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

Square D 9998 SL-22 contact kit restores a single pole on Type S NEMA Size 0–1 contactors, delivering reliable OEM replacement performance for motor and lighting control.

Fluke Cat 8 Network Cable: High-speed 40GBASE-T testing with RJ-45 connectors for switches, patch panels, hubs, and network devices.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.