Search results for: 'compatible'

Fluke TPS VOLTPROBE 600V provides a reliable voltage probe connection for Topas 2000 and Model 1760 power quality analyzers, ensuring accurate high-voltage measurements.

Wöhler 8711 Perlon Push-Head Brush delivers 8 x 8 in M10-thread cleaning coverage with a 3-layer Perlon head for ventilation-line cleaning workflows.

Used Sonatest PMAP505045, 5 MHz 0.5" 45° angle beam probe for weld inspection and flaw detection. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

Fisher 972-097-10-00 metal detector headphones with clear audio, individual volume controls, and 1/4" jack. Padded on-ear design enhances signal clarity and helps detect subtle tones in noisy environments.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

Fluke Networks 10665000 BIX EverSharp blade delivers long-lasting sharpness for clean block terminations and fits compatible Fluke punchdown tools.

Pomona HB-36-2 patch cord delivers reliable test connections with horizontal stacking banana plugs and durable construction for everyday lab use.

AEMC Banana (Female) to BNC (Male) adapter XM-BB, rated 600V CAT III, compatible with AmpFlex sensors, Models K100/K110, and SLII Data Loggers.

Wöhler 8713 delivers wide 13x13 in Perlon push-head brushing for ventilation line cleaning, with a 3-layer brush layout and M10 thread connection.

Certified pre-owned Sonatest QCG2525 2.25 MHz 1/4" single crystal angle beam shear wave quick change ultrasonic transducer with Microdot connector. Designed for weld, forging, and pipe flaw inspection. Compatible with Sonatest and other flaw detectors.

Allen-Bradley 1334B 50906 Power Distribution Board for Bulletin 1334 and 1335 VFD systems, designed to route internal electrical power within compatible variable frequency drive enclosures.

AEMC 2136.76 is a 30 ft test lead set built for DTR Models 8500 and 8510, providing direct replacement coverage for Cat #2118.47.

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

Certified pre-owned Sonatest PE-7.5M44E0.6P 7.5 MHz 44-element 0.6 mm pitch linear phased array ultrasonic probe. Delivers precise flaw detection and high-resolution imaging for challenging welds, pipes, and composites.

Used Sonatest PMAP3737445T, 5 MHz 0.375" 45° angle beam probe for weld inspection, flaw detection, and code-compliant NDT. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Buy from Cartoli or call 1-833-322-7865.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Fluke LENS/WIDE2 wide angle infrared lens expands field of view to 46° x 34°, enabling easier thermal inspections in tight spaces with compatible cameras.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

Allen-Bradley 800T-N26G green pilot light replacement cap for 30mm Bulletin 800T and 800H pilot lights. Designed for field replacement or completing assemblies without color caps.

Certified Pre-Owned ABWM-7T-60° Accupath shear angle-beam wedge for steel. Accupath-case only; designed for transducers with 0.375″ (3/8″) nominal element, 60° shear.

The Wohler M10 Perlon Domed Brush is built for sweeping in chimneys, flues, vents, pipes, and ductwork where a softer brush is preferred. Its domed profile helps the brush feed smoothly through the cleaning path while the perlon (nylon) bristles stay engaged with the interior surfaces for consistent soot, dust, and debris removal.

Digi-Pas DWL5000XY/5500XY Control Box with Bluetooth delivers plug-and-play access to real-time leveling, tilt angle, and vibration monitoring for compatible 2-axis sensor modules, with relay-trigger control for external systems.

AEMC 2135.39 ground rod set includes two 14.5 in T-shaped auxiliary ground electrodes for use with ground testers except clamp-on models.