Search results for: 'electrical equipments'

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Hubbell HBL5366C Insulgrip plug delivers a durable 20A 125V NEMA 5-20P connection with a rugged nylon housing, adjustable cord clamp, and industrial-grade reliability.

High quality termination Tin plated copper UL and RoHS Provides high quality termination and years of trouble free service All ferrules are copper with tin plating (UL* and RoHS)

Fluke 289 Multimeter: Capture up to 15,000 events with TrendCapture, zoom analysis, and remote sharing via Fluke Connect for complex troubleshooting.

LED & HFE test Null DCV Capacitance measurement Overload protection Multi-Function Digital Multimeter Specifications Function Measurement Range DCV 0.1/2.5/10/50/250V, 1000V Null DCV DC ±5V/±25V ACV 10/50/250V, 1000V DCA 50μ/2.5m/25m/250mA, 10A Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) Capacitance C(R×1k): 2000μF(Approx.) Max Battery Check 1.5V/9V, Product does not contain batteries Transistor hFE Test Yes Diode & LED Test Yes Continuity with Beeper Yes Front Panel Controls Range selector switch with “OFF” position, 0Ω adjust knob Power Source AAA(1.5V) x 2pcs and 9-Volt x 1pcs

AEMC 2129.95 RTD Temperature Probe provides temperature compensation capability for AEMC 6250 and 6255 testing systems, helping improve measurement accuracy during resistance testing where ambient temperature variations affect results.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

Pomona 4911A-36-2 retractable sheath banana plug patch cord delivers secure 4 mm connections with insulated safety design. Ideal for electrical test setups requiring flexible 36-inch leads.

Fluke 719 100G Pressure Calibrator: Built-in electric pump, 0.025% accuracy, and one-handed calibration for fast, precise pressure testing.

High quality termination Tin plated copper Polypropylene insulation UL and RoHS compliant View all Insulated Wire Ferrules

High quality termination Tin plated copper Polypropylene insulation UL and RoHS compliant View all Insulated Wire Ferrules

High quality termination Tin plated copper UL and RoHS Provides high quality termination and years of trouble free service All ferrules are copper with tin plating (UL* and RoHS) View all Uninsulated Wire Ferrules

Industrial multimeter service kit combining the Fluke 179 True-RMS digital multimeter and Fluke 323 True-RMS clamp meter. Designed for troubleshooting electrical and electronic systems, with voltage measurement up to 1000 V AC/DC and AC current measurement up to 400 A.

Fluke VPS41 Voltage Probe Set: High-performance probes for 120B Series. Accurate measurements, CAT IV rated, and built to last for industrial and professional use.

The Eagle Eye GFL-1000 Portable DC Ground Fault Locator identifies current leakage faults in DC systems up to 1000 V. It measures grounding resistance and distributed capacitance to locate faults while systems remain online.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

Schneider Electric TRV00911 USB Maintenance Interface: Reliable, high-performance tool for ComPacT NSX & NSXm. Optimize maintenance with ease!

Fluke VR1710 records voltage trends, dropouts, transients, flicker, and harmonics with simple plug-in operation, providing fast diagnostics of single-phase power issues.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

Fluke 117 CAL Multimeter: Compact True-RMS digital meter with non-contact voltage detection, AC/DC measurement, and accurate resistance readings.