Search results for: 'environments'

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

The Eagle Eye GFL-1000 Portable DC Ground Fault Locator identifies current leakage faults in DC systems up to 1000 V. It measures grounding resistance and distributed capacitance to locate faults while systems remain online.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument LI-ION 220 is a 7,800mAh rechargeable lithium-ion battery designed for the INNO Instrument View 500 Optical Time Domain Reflectometer (OTDR). It provides portable field power for fiber optic testing operations and supports extended operation of the View 500 platform during installation.

Fisher XLT-17 leak detector offers precise acoustic water leak detection with a sensitive Multi-Sensor, adjustable filters, LCD display, and headphone output for use on concrete, asphalt, turf, and soil.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The Carlo Gavazzi IA12ALF02POM1 is an M12 flush-mount inductive proximity sensor with a 2 mm rated operating distance. This long-body version features a nickel-plated brass housing, M12 plug connection, PNP normally open output, 10–40 VDC operating voltage, and IP67 environmental protection.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

The GE Fanuc IC660BBR101 is a Genius I/O relay output block providing 16 normally open relay outputs. Designed for distributed control systems, it supports 115/230 VAC block power, individual output status LEDs, and compatibility with a wide range of low-power AC and DC control devices.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

Fluke 1550C Insulation Resistance Tester delivers digital insulation testing up to 5 kV with DAR/PI calculations, long battery life, and Fluke Connect support.

Fluke 376FC True-RMS Clamp Meter delivers wireless AC/DC current and voltage measurements up to 1000A with iFlex probe and Fluke Connect support.

Toshiba VF-S11-4015PL-WN(3) industrial inverter delivers precise speed control for 3-phase induction motors with built-in EMI filtering, sensorless vector control, and compact panel-mount design.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Allen-Bradley 1771-A3B1 PLC-5 12-slot I/O chassis provides reliable backplane communication and power distribution for 1771 modules in panel-mounted industrial control systems.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

The Fluke II905/SB140/FPC3 is an industrial acoustic imaging leak detector kit that pairs the II905 Acoustic Imager with the SB140 Sound Beacon and 3 years of Premium Care. It visually locates and assesses compressed gas, vacuum, and other ultrasonic leaks using a 7″ LCD touchscreen and LeakQ™ analysis to help teams quickly find, size, and document leaks

Fluke ii915/FPC3 acoustic imager detects gas leaks, partial discharge, and mechanical issues with LeakQ, PDQ, MecQ modes and long-range 120 m detection.

Fluke 2052 wire tracer kit delivers CAT IV 600 V safe troubleshooting for energized and de-energized circuits with four tracing modes, power flexibility, and precise fault locating.

Fluke 1748/30/EUS captures waveform, transient, and harmonic data with Class A accuracy and 3000A iFlex probes for advanced three-phase power quality analysis.

Fluke Networks GLD3-DSX-5000-PRO Gold Support delivers 3 years of calibration, repairs, loaner units, 24/7 tech help, accessory replacement, and express freight service.

Fluke Networks TS52 PRO test set provides dial tone detection, caller ID, voltage/current display, DataSafe protection, and a rugged design for telecom line testing.

Fluke 1507 insulation tester delivers advanced megohm measurements, multiple test voltages, PI/DAR calculations, and safety features for industrial electricians.