Search results for: 'on'

The in-use cover for Nimbus and Eclipse Lab Balances helps to protect the products from dust and material. This disposable item keeps the balance clean whilst still letting the user gain access to all the functions. Using the see-through cover can reduce the need for costly maintenance and prolong the life of the balance. This accessory is for top loading Nimbus or Eclipse balances with 120mm pans.

3 colors to indicate over-weight, under-weight, or within preset limits Controlled by included relay box For use with ABK and AFK Series

Looking for a reliable battery pack for your Nimbus Analytical or Precision Balance? Look no further than Adam Equipment's battery pack. This product allows you to use your Nimbus balances in places where power is unavailable. With an extra battery pack, you can reduce the need for trips to recharge the battery and keep your balance operating for longer periods. Choose Adam Equipment's battery pack and enjoy reliable performance from your Nimbus balances wherever you need them.

Protect your valuable Adam Equipment analytical and precision balances from theft and damage with this high-quality Security Lock and cable. Designed to fit perfectly in the slot of many Adam balances, this lock and cable combo is easy to use and provides peace of mind when you're away from your equipment.

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Flir E75-14 Thermal Imaging Camera with High-Resolution and Self-Calibrating Interchangeable 14 Degree Lenses is the newest cutting-edge thermal imaging technology from Flir, providing high sensitivity and resolution in an intuitive handheld design with high-performance features and wireless communication. Powered by a high-performance CPU, this camera delivers 320 x 240 thermal resolution that’s crystal clear, yet affordable while offering powerful functionality at no cost to you.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DTX-MFM2 fiber module are used with a DTX Series Cable Analyzer to test and certify fiber optic cabling installations. 

Vanta Element-S analyzer for affordable alloy ID, including light element detection for magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S), and phosphorus (P)

Key Features

The RD8200G locator effortlessly records all locating parameters, creating a comprehensive overview of field activities. This data can be reviewed by supervisors and health and safety personnel to evaluate usage trends, ensuring alignment with best practices and recognizing training requirements before undesirable work habits emerge.

Discover the Adam Equipment MDW 160M 350lb health and fitness scale, the perfect weighing solution for schools, gyms, and fitness centers. This scale offers an affordable and durable option that meets the practical needs of busy environments. Equipped with a notched counter weight, it provides clear and accurate weight readings, allowing users to track their progress with confidence. The MDW 160M also features a convenient adjustable height rod, enabling precise measurements for height tracking and monitoring.

The MaxTester 720C (MAX-720C) provides users with accuracy, it's inspired OTDR has an effective dynamic range and is optimized for single mode and multimode field testing. An advantage to the MaxTester 720C is that it accurately pin-points faulty connectors or fiber breaks on short spans due to impressive multimode performances. It has a 12-hour battery life which makes every technician’s job easier. This advanced software turns even the most complex trace analysis into a simple, one-touch task.  

AEMC MR416 Dual Range Probe: Hall effect AC/DC probe with 40A/400A & 60A/600A ranges, 10mV/A & 1mV/A output, 4mm plugs, USB or battery powered.