Search results for: '1.5 2'

The Fluke Networks FI2-7000-MPO-NW is a non-wireless FiberInspector Ultra camera optimized for MPO-12/MPO-24 connectors. It provides automated IEC pass/fail analysis, high-resolution end-face imaging and fast inspection workflows for high-density fiber environments.

AFL OFI-400 Fiber Identifier: Detects live fibers, directional traffic, and test tones with ease. Ergonomically designed for efficient, safe fiber identification.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

The Autel Robotics EVO II Car Charger is a fast and reliable charging solution for your drone and remote controller on the go. Charge in just 90 minutes and travel with peace of mind.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.

Viavi OLS-36 Optical Light Source: Compact, quad-wavelength solution for accurate power and loss testing. 80h battery life for reliable field performance.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

Siemens 5SJ4110-7HG42 delivers reliable 10A C-curve protection for DIN-rail panels, offering SENTRON-series performance for industrial and commercial circuits.

Quickly locate cables and faults with the Amprobe AF-600. This item features an A-frame design, compass guidance, and automatic gain signal control.

Digi-Pas DWL1500XY 2-Axis Precision Digital Level brings simultaneous X-Y measurement, 0.0002"/ft resolution, and Bluetooth wireless readout to precision machine leveling, setup, and alignment workflows.

Digi-Pas DWL1300XY 2-axis smart machinist digital level delivers simultaneous X and Y leveling measurement with Bluetooth connectivity, 0° to ±5.00° range, 0.002 in/ft resolution, and precision setup support for machine alignment workflows.

Application: BNC, TNC, Mini-UHF, RG58, 141, 142, 303, 400, 59, 62, 210 Belden 8279, 8281, 9231, 9141 RG-6, 212, 222, 304

AEMC MD305 AC current probe: 600A range with 1mA/A output, rugged clamp design, banana plugs, ideal for meters with ≤5Ω input.

Eaton NHI11-PKZ2 auxiliary contact adds 1NO/1NC signaling for PKZ2 motor protectors, improving control circuit indication and reliability for industrial applications.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

Application: Red, Yellow, Blue Insulated terminals Nylon and Vinyl

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

Delivers fast point-to-point continuity testing for grounded pathways and long-distance connections with polarity reversal, lead compensation, programmable thresholds, and 300 V CAT IV safety.

Eaton FA20 auxiliary contact block adds 2NO contacts to XTMCX contactors and XTRM relays, offering reliable control signaling and easy front-mount installation.