Search results for: 'boxa electromures'

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Allen-Bradley 1336-SCR-SP3A Input SCR Power Module for 1336 Adjustable Drives. Designed for 460V AC line-side rectification in Frame D drives supporting 60–100 HP systems.

Eaton BH-0122 offers reliable 100A, 700V fuse mounting for high-speed semiconductor protection in VFD, UPS, and solid-state control systems.

Application: Miniature Insulated Terminals Nylon and Vinyl

Eaton B-Line BPR2 is a two-device metal protector plate designed for receptacle, GFCI, decorator, or blank openings to help block drywall mud, paint, and debris during installation.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

Allen-Bradley 200-EX640Z1 instantaneous control relay with a 115–125VDC coil, designed for reliable multi-pole switching. Features 6 normally open and 4 normally closed contacts for industrial control logic.

Allen-Bradley 1336-RLOAD-SP2A load resistor module engineered for 1336 PLUS, PLUS II, FORCE, and IMPACT drives, providing controlled regenerative and braking energy dissipation in supported voltage ranges.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Allen-Bradley SP-135893 is a precharge SCR firing circuit board kit for 1336 series 75 HP drives, supporting controlled DC bus charging and reliable drive startup in industrial motor control systems.

High quality termination Tin plated copper UL and RoHS Provides high quality termination and years of trouble free service All ferrules are copper with tin plating (UL* and RoHS)

Allen-Bradley 800T-XA contact block delivers 1NO/1NC switching for 30.5 mm Bulletin 800T and 800H operators, providing dependable control panel signaling in modular industrial systems.

Allen-Bradley 1771-A4B PLC-5 16-slot I/O chassis provides a backplane for mounting 1771 I/O modules, distributing 5V DC power, and supporting industrial PLC-5 control system expansion.

Allen-Bradley 1336-CONV-SP5A converter power module kit for upgrading 1336 series C-frame adjustable frequency drives to Series C operation at 25 HP and 460V AC.

Superior Electric SS50 SLO-SYN AC synchronous motor delivers fixed-speed synchronous operation for motion control systems with 120 VAC input, 72 RPM output, and documented SLO-SYN holding torque characteristics.

The Fluke Biomedical ESA615 Electrical Safety Analyzer is an all-in-one portable instrument combining a full electrical safety tester and ECG simulator, designed for healthcare technology management professionals. It automates compliance testing to ANSI/AAMI ES1, NFPA-99, IEC62353, IEC60601-1 (2nd/3rd Editions), and AS/NZS 3551 standards.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication.