Search results for: 'marked'

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

Fluke Networks modular adapter enables quick, non-disruptive line testing with secure probe access and rugged K-plug options for field use.

OMRON PTF11PC 11-pin relay socket lot with 10A rating and screw-terminal wiring layout, ready for relay socket replacement, panel support, or control component stocking.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

Valco Melton 765XX125 Valve Module Assembly delivers controlled fluid actuation for industrial adhesive and dispensing systems, supporting precise flow regulation within automated production environments.

AEMC 2140.45 color-coded input ID marker set supports clear input identification for compatible PowerPad and PEL series power instruments.

MSA Ultima X hydrogen sulfide gas sensor cartridge labeled for 0–50 ppm detection. Model A-ULTX-SENS-16-1-0 with software version 1.10, shown in stainless steel threaded housing with red protective cap. Designed as a replaceable sensor module for Ultima X systems.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

AEMC 2121.55 replacement test lead set provides three color-coded 1000V CAT III, 10A leads with clips for AEMC 6608 and 6609 power quality analyzers.

REES 50702-000 delivers heavy-duty SPST-NC contact control for REES push button operators and selector switches, with screw terminals and gold-plated contacts for dependable circuit switching.

GE THQL32020 Q-Line breaker delivers reliable thermal-magnetic protection with quick-make/quick-break action and 3-pole 20A design for GE load centers.

Gripple GS12-10S5-R5-2P seismic restraint kit delivers a ready cable-bracing hardware set with 1/8 in x 10 ft cable, GS12 fasteners, standard end fittings, and retrofit structural eyelets.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

The Wöhler VIS 700 HD (7459) is a dedicated chimney inspection camera with a Ø 1.5″ motorized pan-and-tilt HD camera head, self-leveling, and autofocus. Designed for professional chimney and flue inspections with crystal-clear HD imaging.

Balluff BFS 26K-PS-L01-S115 color sensor delivers reliable, high-precision color detection for automation, compatible with any PLC using 3×PNP inputs and M12 cabling.

Westinghouse Ovation 1C31179G02 Remote I/O MAU module for distributed control system remote I/O communication and field device integration.