Search results for: 'lbs'

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.

Eaton BFW-3 fuse wire delivers reliable 3 A circuit protection in older plug fuses — fast-acting alloy wire that melts cleanly under overcurrent to safeguard wiring and appliances.

New Allen-Bradley 1756-IB32/B ControlLogix 32-Point 24V DC Digital Input Module for high-density DC signal interfacing in ControlLogix systems. Factory sealed, fast shipping, Cartoli support.

The Wohler Residential Air Duct & Dryer Vent Cleaning Set pairs rotary duct and dryer vent cleaning tools with VE 400 HD inspection for cleaning, viewing, and documenting residential duct conditions.

Designed for heavy-duty weighing tasks, PT platform scales offer solid, dependable stability. PT features the AE503 indicator, which offers a built-in printer with powerful software that allows users to personalize labels. Use a PC to create custom layouts that include your own logos and barcodes. A diamond-plate surface on the large steel base helps reduce the chance of slippage during weighing, while adjustable rubber feet simplify setup and operation. The AE 503 provides numerous weighing units and multiple languages, and can be mounted on a pole for added convenience. Checkweighing is fast and simple with configurable audible alarms, and results are readily visible in 34-mm-high digits on the backlit display. Color-coded keys are easily recognizable to speed up weighing tasks.Sturdy ABS plastic housing makes the AE503 indicator able to withstand demanding use in industrial locations.

Elcometer 331 TH Deep Cover Concrete Covermeter & Half Cell Gauge for reinforced concrete surveys requiring rebar location, cover depth measurement, bar sizing, and TH linear/grid data logging.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Siemens A1-108-101-502 operator display control panel for parameter access, status monitoring, and fault diagnostics in compatible SIMOREG DC drive systems.

Flexco NC-36-1 conveyor belt hinge pin delivers a flexible 1/4 in nylon covered steel cable connection, pre-cut for 36 in belt width splices in compatible Flexco hinged fastener systems.

GAI-Tronics 13314-002 is a 16-ohm indoor/outdoor compression driver for compatible horn assemblies. It is rated for Div. 2 hazardous areas, features 1.375-18 UNEF horn threads, and carries a NEMA 4X enclosure rating.

Thomas & Betts 5257 is a 2 in non-insulated 90° liquidtight conduit connector for liquidtight flexible metallic conduit, with NPT threads and malleable iron body construction. 

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

Allen-Bradley 800H-JP2KB7AAXX hazardous location selector switch from Bulletin 800H. This is a 3-position, non-illuminated, maintained standard knob operator with KB7 standard cam and AAXX contact block configuration.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

Fisher SONDE-TW6 SR-81 is an 81.92 kHz pipe signal transmitter designed for use with TW6 line tracers. Inserted into non-metallic pipe or duct via push rod, it enables precise underground pipe tracing and blockage location.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke FLK-PTI120 9HZ 400C Pocket Thermal Imager is a rugged handheld infrared camera with 120 x 90 resolution and a -20°C to 400°C measurement range. It features a 3.5" LCD touchscreen with IR-Fusion™, Wi-Fi connectivity, Asset Tagging, IP54 protection, and 1-meter drop rating.

Fluke FLUKE-CV401 is a 4 in (95 mm) ClirVu® infrared window with security key door latch for electrical inspection applications. It features AutoGround™ integrated grounding, IP67 environmental protection, and arc testing to 63 kA per IEEE C37.20.7 at KEMA.

The PLS 180R RBP KIT Cross Line Red Laser Level Kit provides a self-leveling cross line laser with ≤1/8 in accuracy at 30 ft (≤3 mm @ 10 m). It features a 180° horizontal fan angle, 130° vertical fan angle, pendulum lock for transport protection, IP54 rating, and includes rechargeable and alkaline battery packs with mounting accessories.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.