Search results for: 'DELL.'

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

The Fluke 700PTP-1 is a pneumatic test and vacuum pump designed to generate pressure up to 600 psi (40 bar) and vacuum down to -13 psi (-0.9 bar). It features adjustable stroke control, a vernier for fine pressure adjustment, and dual 1/4 in NPT female ports for simultaneous connection to a reference gauge and device under test.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The Fluke 729 Pro 7M Automatic Pressure Calibrator is a portable calibrator with an internal electric pump for automatic pressure generation and regulation up to 1000 psi. It supports pressure calibration, pressure measurement, voltage measurement, and mA sourcing with built-in HART communication.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

Fluke T150 two-pole voltage and continuity tester delivers fast AC/DC measurements from 6–690V with backlit LCD, switchable load, resistance testing, and multi-mode voltage indication for electrical diagnostics.

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

Pomona 1756-24 Shielded Low Voltage Spade Lug Patch Cord supports precision microvolt and nanovolt measurements using gold-plated ETP copper spade lugs and a shielded 24-inch cable to minimize thermal EMF and signal interference.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Pomona 3789 BNC Male to Minigrabber Test Clip breakout cable enables fast, reliable signal access from BNC jacks to minigrabber clips for precise electronic testing and troubleshooting.

Fluke ST120+ GFCI Socket Tester with beeper verifies outlet wiring, detects common faults, and tests GFCI operation using bright LEDs and audible voltage alerts for faster, safer electrical checks.

Pomona 5672A test lead kit delivers flexible silicone leads, right-angle banana plugs, insulated alligator clips, and extended probe tips for safe DMM testing.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Amprobe PRM-6 tester verifies phase sequence and motor rotation with wireless non-contact detection and CAT IV 600 V safety.

Amprobe UAT-620 Underground Locator enables safe CAT IV 600 V tracing of energized and de-energized utilities with depth measurement up to 20 ft.

Fluke 754 Documenting Process Calibrator combines HART communication, sourcing, measurement, and automated documentation for complete process calibration.

Fluke SOL-TI-27HZKIT combines high-efficiency PV I-V curve tracing with 27 Hz thermography for fast, accurate solar performance testing.

Fluke 700PTPK2 Premium Pneumatic Test Pump Kit generates up to 600 psi for fast, accurate pressure testing using no-tools adapters and rugged field-ready design.

Fluke Networks GLD-OFP-MOD-S provides 1 year of Gold Support for OFP-SM, including annual calibration, factory refresh, loaner coverage, software updates, and 24/7 technical support.

Fluke Networks GLD3-CFP-MM-ADD provides 3 Year Gold Support technical service for CFP-MM-ADD, delivering annual calibration, factory refresh, loaner coverage, and 24/7 technical support for reliable operation.

Fluke Networks MS2-MAG-KIT magnetic holster strap keeps compatible testers secure and hands-free, attaching to metal surfaces or hanging from a J-hook.