Search results for: 'application is'

Application D-subminiature contacts, RS232 pins & sockets AWG 30-18 Open Barrel contacts (Molex/AMP style)

AEMC 2151.39 is a 45 ft blue guard test lead rated for 15kV and equipped with an integral clip. Designed for use with AEMC Models 6550 and 6555 insulation resistance testers, it serves as a replacement for Cat. No. 2151.22.

Lenze EWAL001ZM-001 servo blower cable assembly connects external fan systems used with compatible L-force servo motors, supporting integrated cooling cable routing for MCS, MCA, and MQA applications.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The PLS 5R is a self-leveling five-point red laser level designed for layout, alignment, and squaring tasks. It projects plumb, level, and square reference points and features a pendulum lock for transport and tilt mode operation. Supplied as a bare tool with pouch and battery pack.

The Banner BT23S is a bifurcated, diffuse-mode glass fiber optic cable with a 3.2 mm bundle diameter and stainless steel monocoil sheathing. Designed for harsh industrial environments, it supports reliable sensing in high-temperature and electrically noisy applications.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Pomona 3846 BNC female to female panel mount coupler with isolated ground, designed for secure panel installations requiring 50-ohm impedance and electrical isolation between shell and flange.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

The AMLOC 120-4416 is a high-temperature capacitance sensor assembly used within AMLOC Energy Management Systems for desiccant air dryers. It interprets capacitance signals associated with moisture loading in the desiccant bed to support energy-managed dryer operation.

Oracle 2040-283 is a CAT5e RJ45 crossover network cable supplied as a single cable assembly. The packaging label identifies this unit as “CABLE CAT 5E XOVR RJ45.” Intended for Ethernet connectivity applications requiring a crossover cable configuration. Country of origin: United States.

Introducing the OWON XDG2100 Arbitrary Waveform Generator – Precision and Versatility at Its Peak.

Square D SN0610 insulated groundable neutral assembly kit for 60A/100A heavy-duty safety switches, compatible with Class 3110 F5/F6 Series.

The Ovation 5X00481G01 OCR1100 Processor Module is a controller Atom CPU module designed for industrial automation and control systems. It features an Intel® Atom™ D525 1.8 GHz processor, 2 GB DDR3 SDRAM, and 4 GB eMMC storage, operating on Windows Embedded Standard 7. The module supports extended temperature operation from -40°C to +70°C.

Fisher TW9000-CC5 is a multi-frequency underground locator for pipes and cables. It features digital signal processing, multiple locating modes, up to 32 ft depth, and includes a 5" Coupling Clamp and soft case.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

EM Integrated ASTAQ385MR0553002K000 plug delivers reliable 26-pin signal connectivity with lamella clamping, Series 627 compatibility, and included female contacts.

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

The Wöhler Rotary Viper Stovepipe 8' is a compact rotary cleaning tool for stovepipes, ducts, and dryer vents. Designed for stovepipes from 4" and built with an M10 threaded endpiece, it offers a practical option for targeted rotary cleaning in shorter runs.