Search results for: 'open'

Pomona 4531-C-36 test cable converts BNC male connections to insulated alligator clips with molded strain relief for secure, versatile testing.

Thomas & Betts MSC20 motor stub splice insulators provide insulated protection for compatible splice connectors up to 600 V and 90°C using modified neoprene construction for electrical connection insulation applications.

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

ABB NKTU11-14 INFI 90 Termination Loop Cable supports INFI 90 system cable connections with a loop cable format and printed 300V, 90°C, #22 AWG construction details.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Allen-Bradley SP-135775 bus capacitor kit designed for 1336 series AC drives. Restores DC bus voltage stability and ride-through performance in compatible 15–50 HP drive configurations.

York 031-00005-000 thyristor SCR module designed for HVAC power control circuits. Functions as a latching switch within York chiller and VSD control boards, ensuring stable electrical switching performance.

AEMC 2122.31 Shock Proof Housing provides added impact protection for compatible C.A1110, C.A1227, C.A1246, C.A1821, C.A1822, and C.A1823 test instruments during transport, storage, and field use.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Allen-Bradley 1756-L55/A ControlLogix 5555 processor supplied with a 1756-M13/A 1.5 MB memory expansion module. This controller requires external memory for operation and installs in a ControlLogix chassis for high-performance industrial automation systems.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Honeywell 620-1690 is a processor rack chassis used in the legacy IPC 620 / ISSC 600 PLC system. It provides the physical backplane and power distribution framework for processor, I/O, and communication modules in rack-mounted industrial control installations.