Search results for: 'panda with'

The Thermo Scientific Niton XL2 Plus is a high-performance handheld X-ray fluorescence (XRF) analyzer designed as a fully configurable platform for non-destructive elemental analysis. It supports demanding industrial, environmental, and precious metals workflows through selectable detection modes.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

Control Devices Style 260 is a 2 in. Dry Link dry disconnect adapter for bulk fluid transfer systems. It serves as the fixed adapter half of a dry disconnect coupling assembly used where controlled connection and separation are required.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

AEMC 2140.73 pairs a 10 ft black test lead with waterproof cap and a black alligator clip for Model 8435, supporting 1000V CAT IV test lead connection with a 15A UL-rated clip.

Wohler 65 ft GRP Cleaning Rod with 7 mm diameter and M10 thread end delivers extended chimney and flue cleaning reach with durable glass fiber reinforced construction and PA-coated protection.

Fluke I17XX-FLEX1500/3PK flexible current probes deliver up to 1500A AC measurement with 12-inch loops and direct connection to 173X energy and power loggers.

Fluke Networks OptiFiber Pro HDR Module: High-performance fiber testing for enterprise, datacenter, OSP, and PON networks with USB connectivity.

The Fluke I17XX-FLEX6000/4PK includes four 36 inch iFlex flexible AC current clamps rated to 6000 A AC. Designed for use with Fluke 1736 and 1738 Energy or Power Loggers, these Rogowski-style probes connect directly to the instrument and display measurements without scaling factors.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

AEMC 2118.82 Kelvin Clips deliver 10 ft lead reach for micro-ohmmeters Models 5600, 6240, and 6250 with fork terminal termination.

Amprobe DGC-1000A Ground Resistance Tester delivers fast clamp-on testing from 0.025–1500 Ω with true-RMS current measurement and onboard data logging.

Wohler 3700 Smoke Pump Filter Dispenser keeps up to 300 smoke pump filters organized and ready for fast replacement during chimney, flue gas, and combustion testing workflows.

Wöhler TF5 Flue Gas Temperature Probe delivers Type K temperature measurement for flue gas testing with compatible Wöhler analyzers and meters, supporting readings up to 1,652 °F.

Omron MK3P5-S relay: Reliable 3PDT switching with mechanical indicator and test button for precise control in industrial applications.

The Wohler DC2000 US Pressure Computer Kit brings sharp pressure measurement capability for WC readings, gas line checks, pipe testing, appliance tuning, humidity monitoring, and logged field measurements.

The Wöhler 3853 Centering Brush Extension adds stable camera rod guidance for VIS inspection work, fitting all camera rods and mounting at any position on the rod for controlled movement in Ø 7.9" pathways.

Fluke I17XX-FLEX1500 iFlex flexible AC current clamp measures up to 1500A AC and connects directly to compatible Fluke power and energy loggers, enabling easy installation on large conductors.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.