Search results for: 'fusion use'

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument  Universal Fiber Holder is an accessory designed for INNO fusion splicers to position and secure optical fibers during splicing. The holder supports multiple fiber preparation types and provides stable alignment inside the splicer. Variant options support different splicer models and left or right holder configurations.

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

INNO Instrument FH-Single Fusion Series fiber holder for 900 µm single fiber in detachable M Series fusion splicer applications.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

The INNO Instrument FH Series Universal Fiber Holder is an accessory designed for INNO fusion splicers to position and secure optical fibers during splicing. The holder supports multiple fiber preparation types and provides stable alignment inside the splicer. Variant options support different splicer models and left or right holder configurations.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

The INNO Instrument VIEW 12R Pro is a 12-fiber ribbon fusion splicer with motorized clamp alignment, 5-inch touch LCD, integrated heat oven, and Nano-SIM IoT/GPS support. It stores up to 10,000 splice records for ribbon and single-fiber applications.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.