Search results for: 'querty'

Honeywell Kromschroder UVS 10D2 UV Burner Sensor w/ quartz guard, 1/2" NPT. High-reliability UV flame proofing for industrial furnaces and boilers, EN 298-compatible.

Fluke 820-2 LED Stroboscope enables non-contact rotational speed diagnostics with high-intensity LED output, quartz accuracy, and sharp stop-motion imaging.

Fluke Networks GLD-OFP-200-SI Gold Support provides 1 year of calibration, loaner units, damage coverage, accessory replacement, and 24/7 technical assistance.

Suitable for testing ETIC fixings (External Wall Insulation Fixings) with the M2000 Tester.

Designed for use with various connectors such as MOLEX, AMP, TYCO, etc. Quickly and easily extract crimped pins from their housing. Other sizes available (sold separately).

Introducing the OWON XDG2060 Arbitrary Waveform Generator – Precision, Power, and Performance Unleashed.

The Autel Robotics Care Standard 2 Years for Evo Max 4T offers 2 years of protection and expert support, ensuring your drone flies worry-free.

GAI-Tronics 12514-008 is a 15 ft PVC coil cord kit for industrial handset stations. It is used as a replacement cord assembly for extended handset reach.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

Fluke Networks CFM-TRC-S-MPO24U CertiFiber™ Max Test Reference Cord Set for testing single-mode MPO 24 pinned cables. Includes one main and one remote reference cord. Designed for use with the CertiFiber™ Max Optical Loss Test Set and supports standards-preferred one-jumper reference method.

Wöhler SD Card for VIS provides dedicated inspection data storage for compatible Wöhler VIS equipment, supporting recording, saving, and organized access to inspection files.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke Networks TRC-SM-VERIFY-MPO16U is a reference-grade single-mode MPO16 verification cord designed for CertiFiber Max optical loss testing, ensuring accurate reference validation for unpinned MPO16 links.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Fluke Networks MDC-MDC-SM UPC is a single-mode test reference cord designed for precise optical loss measurements, using reference-grade fiber and UPC connectors for consistent, repeatable Tier 1 testing.

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

Fluke Networks TRC-SM-VERIFY-MPO24P is a reference-grade single-mode MPO24 verification cord for CertiFiber Max optical loss testing, ensuring accurate reference validation with pinned MPO24 fiber links.

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

AEMC 5000.13 power adapter and US power cord for reliable operation of ground testers models 6470, 6471, and 6472 with dual voltage support.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

Fluke TRC-SM-VERIFY-MPO24U is a reference-grade single-mode MPO 24 verification cord for CertiFiber™ Max testing, ensuring accurate reference setup when testing unpinned MPO fiber links.