Search results for: '200a'

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

AEMC 6292 Micro-Ohmmeter: Portable low-resistance tester with 200A current, precise measurement, and DataView software for efficient reporting.

AEMC 2129.72 Kelvin Lead Set provides 25 ft Kelvin leads with 200A Hippo clamps for use with AEMC Model 6292 low-resistance testing applications requiring secure current and potential connections.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

AEMC MN261 AC Current Probe: Selectable 20A/200A ranges, BNC output, 100mV/10mV per amp, wide frequency response, ideal for oscilloscopes.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

Fluke T6-1000PRO electrical tester uses FieldSense technology to measure true RMS AC voltage and current up to 1000V and 200A through an open fork for faster, safer troubleshooting.

AEMC MN291 AC Current Probe: 200A range, 100mVDC/A output for DMMs or loggers, compact design with banana plug lead, ideal for DC voltage input instruments.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

LEM USA HAL 200-S Current Transducer: Precision 200A Hall Effect sensing for industrial power systems. Compact, efficient, and high immunity to interference!

AEMC LM103 AC Current Probe, 200A range, 1mV/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, compatible with power analyzers & DMMs.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

AEMC MN353 AC Current Probe: 150A range with 10mV/A voltage output. 5 ft lead with banana plugs. High accuracy, low phase shift. Replaces Model MN251.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

AEMC OX 5042B Handscope is a 3-in-1 oscilloscope, multimeter, and harmonic analyzer kit with 2 isolated channels, 40MHz bandwidth, and long battery life.

Eaton DS200H2CS Type H2 2" hub delivers a watertight aluminum conduit connection for CH and BR loadcenters, ensuring secure outdoor panel installations.