Automation 337 Items

AEMC 2126.46 K-Type Needle Thermocouple Probe brings needle-style temperature measurement to compatible AEMC data logging workflows, with a -58°F to 1292°F range.

Eagle Eye battery testing kit series supports stationary battery diagnostics with portable testing tools, electrolyte measurement, and data management.

Eagle Eye IBEX-Series portable battery resistance tester measures battery health online with fast resistance, voltage, current, and temperature diagnostics.

Eagle Eye LBAC-Series AC Load Bank provides portable AC load testing for generators and inverters with rugged controls, cooling, and protection features.

Eagle Eye LB-480-100-CCD delivers 480V, 100A constant-current DC load testing with auto-sensing voltage, adjustable discharge current, internal data saving, 5" LCD control, and data management software.

Eagle Eye Power Solutions LB-Series constant current DC load banks support battery discharge, capacity, acceptance, and DC system testing with auto-sensing voltage control.

Omron Automation Z-15GD55-MRA basic switch delivers compact snap-action control with short spring plunger actuation, attached lead wire, and visible 15A AC rating for automation switching needs.

Eagle Eye Power Solutions SLB-Series Smart DC Load Bank Standard delivers programmable constant current battery discharge testing with integrated monitoring, data logging, and wide standard voltage coverage from 10V to 576V.

The Westinghouse 5X00070G33 delivers precise multi-channel voltage signal acquisition for Ovation DCS environments, supporting ±5V and ±10V inputs with isolated channels and high-resolution data capture for reliable industrial monitoring.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

Allen-Bradley 1771-OFE2 is a PLC analog output module built for 1771 I/O systems, delivering four isolated current outputs, selectable scaling, and block transfer operation for industrial control applications.

Bently Nevada 330101-00-80-05-02-00 3300 XL 8mm Probe built for vibration sensing in 3300 XL monitoring setups, with attached cable and connector shown in the provided images.

Moore Industries IPT2 current-to-pressure transmitter converts a 4-20 mA signal into a proportional 6-30 psig pneumatic output for valves, dampers, and pneumatic actuators in process control systems.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

Bently Nevada 330102-00-30-05-02-00 is a 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, armor, and 5.0 m total length for non-contact vibration and displacement measurement in rotating machinery systems.

Emerson Ovation 5X00070G03 high-speed analog input module delivers 8 isolated voltage channels, 14-bit conversion, and configurable 50/60 samples per second acquisition for Ovation DCS data capture.

Emerson KJ3204X1-BK1 is a DeltaV digital output module with 32 high-side 24 VDC channels for distributed control and automation I/O applications.

Commtest vb7 vibration data collector for route-based machinery vibration measurement, spectrum and waveform analysis, balancing, and condition monitoring with firmware v2.1.8 and IMI ICP accelerometers.

The Emerson Ovation 5X00241G02 Processor Module is an industrial control system component designed for integration within Ovation distributed control system architectures. Identified by model number 5X00241G02, it functions as a processor module within compatible Emerson Ovation platforms.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Emerson KJ2003X1-BK1 SD Plus Controller is a DeltaV series industrial automation component designed for distributed control applications. It supports 12 VDC local bus power at 75 mA and 24 VDC bussed field power at 150 mA, with 24 VDC field circuit at 5 mA per channel. The controller operates in ambient temperatures from -40°C to +70°C and supports industrial vibration and shock tolerance ratings.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

The Emerson KJ2006X1-BK1 Virtual I/O Module (VIM) is designed for DeltaV Safety Instrumented Systems (SIS) with CHARM I/O technology. It simulates up to 96 individually addressable I/O channels for offline system development, logic validation, commissioning preparation, and operator training without physical field wiring.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.