Automation 337 Items

Allen-Bradley 1771-ID16/A AC/DC 120V isolated input module for 1771 I/O chassis. This 16-point module supports 120V AC/DC inputs and uses backplane power.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

Eagle Eye DLV-Ultra battery testing kit with DLV-Pro voltmeter and SG-Ultra hydrometer for measuring voltage, specific gravity, temperature, and discharge performance.

Eagle Eye DLV-Pro Data Logging Voltmeter for recording, viewing, and analyzing cell voltages from 0-20 VDC with on-site statistical, graphical, and discharge test analysis.

Eagle Eye DLV-Max Kit combines the DLV-Pro and SG-Ultra Max for battery voltage, specific gravity, and temperature testing with Winmeter 5.1 analysis software.

Eagle Eye HGD-SB sensor board for HGD-Series gas detectors. PCB assembly with integrated components for gas detection systems.

Eagle Eye Power Solutions SG-500 portable digital hydrometer for specific gravity measurement in battery fluids, non-datalogging, with automatic temperature compensation and 1.000-1.405 range.

Eagle Eye SG-Ultra Max Battery Cover designed for the SG-Ultra Max Digital Hydrometer battery compartment.

The Eagle Eye IBEX-Temperature Probe-IR is a temperature probe accessory designed for use with IBEX battery testing equipment. The probe connects via cable and supports temperature measurement during battery testing and diagnostic procedures.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The Schaevitz R36AS is an AC operated RVDT (Rotary Variable Differential Transformer) designed for angular position measurement in harsh environments. It features a non-contact electromagnetic design, stainless steel housing, and a Size 15 servo mount configuration. The sensor supports operation from -55°C to +150°C and provides calibrated angular sensing with high reliability and infinite resolution.

Emerson Ovation 5X00106G31 electronics module for Ovation DCS analog input. Provides 8 isolated 4–20 mA channels with per-channel HART transceivers for device communication. Supports signal acquisition between field devices and the controller.

The Ovation 5X00226G03 is an I/O Interface Module designed for use within Ovation DCS systems. Manufactured by Emerson, this module supports industrial control applications and is identified under model number 5X00226G03. Product weight is 0.34 kg with listed dimensions of 12.1 × 5.2 × 16.6 cm.

The Ovation 5X00481G01 OCR1100 Processor Module is a controller Atom CPU module designed for industrial automation and control systems. It features an Intel® Atom™ D525 1.8 GHz processor, 2 GB DDR3 SDRAM, and 4 GB eMMC storage, operating on Windows Embedded Standard 7. The module supports extended temperature operation from -40°C to +70°C.

The Schneider Electric Modicon Quantum 140XCP51000 is a dummy module with integrated terminal strip door designed for unused discrete I/O slots in Quantum PLC racks. It maintains rack mechanical integrity, preserves airflow for cooling, and protects internal backplane components from dust and contact.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

The Mettler Toledo M300 2-Channel Multi-Parameter Transmitter is a ¼ DIN panel-mount analytical transmitter designed for pH/ORP, oxygen, and conductivity measurements. It features dual channel capability, isolated 0/4–20 mA outputs, configurable relays, and USB connectivity for configuration and software updates. The backlit LCD display and quick setup interface support operation in industrial process environments.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

The Georg Fischer Signet 3-8510 is an integral-mount paddlewheel flow sensor designed for use in liquid flow measurement applications. This sensor is part of the GF Signet flow measurement platform and is intended for installation within compatible piping systems to generate a flow-proportional signal.

The SEKAI RSC-A90 is a ruggedized color camera designed for high-resolution imaging in harsh environments. It features a 1/2" Hyper HAD CCD sensor with 470 TV lines of resolution and selectable NTSC or Y/C output. The camera supports high-speed shutter control up to 1/100,000 second, AGC on/off, and auto white balance, operating from 12 VDC.

The Mazak R26ZZ004340 Tool Data Read Head Sensor (model CIT3ASX1N12ST) is used in Mazak CNC machines for tool data identification and management. This M12 cylindrical sensor functions as a read/write head supporting automated tool handling and tool information tracking within compatible machining systems.

The Carlo Gavazzi IA12ALF02POM1 is an M12 flush-mount inductive proximity sensor with a 2 mm rated operating distance. This long-body version features a nickel-plated brass housing, M12 plug connection, PNP normally open output, 10–40 VDC operating voltage, and IP67 environmental protection.