Search results for: 'lowz konect'

The AFL FuseConnect SC FUSE-SC9SMA-6 APC is a high-performance, field-installable single-mode connector designed for 900 µm fiber. This fusion splice-on connector features a pre-polished ferrule for easy installation without crimping, ensuring low insertion loss and optimal signal integrity. Ideal for use in FTTP networks, data centers, and telecommunications, the SC/APC design provides reliable connectivity and superior performance in demanding environments.

Fluke Networks MRC-62EFC-SCLCKITM Encircled Flux TRC Kit supports accurate multimode optical loss testing with durable metal LC connectors.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

Fluke Networks MDC-MDC-SM UPC is a single-mode test reference cord designed for precise optical loss measurements, using reference-grade fiber and UPC connectors for consistent, repeatable Tier 1 testing.

Fluke Networks NFA-MDC-V1-ADP MDC Universal Adapter enables direct MDC cable connection to CertiFiber Pro Loss Test Sets for accurate fiber testing.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks SRC-9-SCLCAPCKIT-M single-mode 9 µm test reference cord kit with metal LC/APC connectors, designed for accurate optical loss testing and seamless use with CertiFiber Pro fiber testers.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

Fluke Networks singlemode fiber cable 2M LC-LCAPC with metal connectors, ideal for precise optical loss testing and LC/APC network measurements.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

Fluke Networks MRC-625-EFC-SCLC-M TRC delivers 62.5 µm multimode EF-compliant testing with SC to metal LC connectors for precise optical loss measurements.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks TRC-SM-VERIFY-MPO12P is a reference-grade single-mode MPO12 verification cord for CertiFiber Max systems, ensuring accurate reference validation for pinned MPO Type A fiber testing.

Fluke Networks 2M Singlemode TRC cable with SCAPC-LCAPC connectors ensures precise optical loss testing and reliable fiber certification performance.

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

Fluke CFP2-100-Q CertiFiber Pro OLTS delivers fast fiber certification with 3-second loss testing, dual-wavelength analysis, and automated pass/fail reporting.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

Fluke Networks TRC-SM-VERIFY-MPO16U is a reference-grade single-mode MPO16 verification cord designed for CertiFiber Max optical loss testing, ensuring accurate reference validation for unpinned MPO16 links.

Fluke FLK-289/FVF/IR3000 kit combines advanced logging, wireless sharing via Fluke Connect, and TrendCapture analysis for diagnosing complex electrical issues.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.