Search results for: 'protect nieu'

Wohler 7802 Replacement Glass Dome restores protected viewing compatibility for Wöhler VIS 2000 PRO and VIS 400 color and b/w pan & tilt camera heads.a

Bussmann LPJ-5SP Low-Peak time-delay fuse provides dual-element, current-limiting circuit protection for 600VAC-or-less applications.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

Static dissipative mat for workstation Heat tolerance: 158°F (70° C) Resistivity Face & Center & Bottom Layers: 10M~1KMΩ/SQ Combination layer: 1K~1MΩ/SQ, Static decay time: < 0.5sec

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

FM-IUN102 Input Universal Function Module: Seamless integration with DCM & XM for RTD, voltage, current, and binary inputs. Reliable, compact, and high-performance.

Fisher CASETW9000-HC hard case protects TW9000 utility locator systems during storage and transport. Rugged exterior with foam interior safeguards instruments from impact and damage.

Eaton CHSPT2MICRO delivers reliable whole-home surge protection with Type 2 SPD performance, 36kA rating, and NEMA 4 durability for 120/240V panels.

Eaton WMS1C10SP 10A supplementary protector offers reliable Type C protection for control panels, PLCs, and power supplies with DIN-rail mounting and UL1077 compliance.

Fisher CASE-MSERIES hard carrying case for M66, M97, and M101 detectors. Durable build with foam interior protects M-Series locators during storage, transport, and field use.

Eaton Bussmann 2432B59 semiconductor fuse delivers 10A, 250V high-speed protection for sensitive power electronics with a ceramic body and 200,000A interrupting rating in a pack of 10.

Littelfuse JTD-030ID fuses deliver 30A Class J circuit protection with indicating status visibility, 600 VAC or less rating, and time-delay performance for compatible electrical systems.

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

Wöhler 2641 Protection Sleeve with cutout is made for 1.5-inch camera heads, adding protective coverage and cutout clearance for visual inspection work.

Eaton PKZM01-1 delivers reliable 0.63–1A motor protection with thermal-magnetic performance, IEC compatibility, and dependable overload and short-circuit safeguarding.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

Siemens Furnas E62 thermal overload heater element delivers thermal overcurrent protection for use with thermal overload relays, magnetic motor starters, and motor control applications.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Mersen High-Speed Cylindrical Fuse: Fast-acting 690VAC protection for inverters, UPS, and motor drives. Reliable, current-limiting, and built for semiconductor safety.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.