Search results for: 'rate stock'

Littelfuse JTD-030ID fuses deliver 30A Class J circuit protection with indicating status visibility, 600 VAC or less rating, and time-delay performance for compatible electrical systems.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

The Eaton FAZ-C20/3 is a 20 A, three-pole miniature circuit breaker from the Moeller xEffect FAZ series. It features a C tripping characteristic and is rated for 240 V AC / 415 V AC applications. Designed for industrial and advanced commercial switchgear, it mounts on a 35 mm top-hat rail in accordance with IEC/EN 60715 and supports modular installation with a width of three modules.

Bussmann LPJ-30SP delivers 30A Class J circuit protection with LOW-PEAK dual-element time-delay performance, current limiting design, and 600VAC or less rating.

Eaton WMZTBCON miniature circuit breaker connector with E Nr. 64883 marking and visible UL/IEC electrical ratings for circuit protection assemblies.

Eaton PKZM0-10 motor-protective circuit breaker delivers adjustable 6.3-10 A motor protection, phase-failure sensitivity, and 4 kW performance at 380/400 V AC-3e in a compact three-pole design.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

Eaton Bussmann 2432B59 semiconductor fuse delivers 10A, 250V high-speed protection for sensitive power electronics with a ceramic body and 200,000A interrupting rating in a pack of 10.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

AEMC 5000.91 Fuse Set of 5 UL rated 0.63A fuses, 6x32mm size, designed for fused leads ensuring reliable circuit protection.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

The Bussmann JKS-40 is a Class J fast-acting, current-limiting fuse rated at 40 A and 600 Vac. It is designed for rapid response to short-circuit conditions in industrial and commercial electrical systems requiring high interrupting capacity.

Allen-Bradley 1489-M1C250 is a 25A UL489-listed 1-pole DIN-rail circuit breaker with C-curve thermal-magnetic protection, designed for reliable branch circuit protection in industrial control panels.