Search results for: 'usba20075 usba20075 usb 200ma'

The Fluke Biomedical ESA615 Electrical Safety Analyzer is an all-in-one portable instrument combining a full electrical safety tester and ECG simulator, designed for healthcare technology management professionals. It automates compliance testing to ANSI/AAMI ES1, NFPA-99, IEC62353, IEC60601-1 (2nd/3rd Editions), and AS/NZS 3551 standards.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

AEMC 2153.78 USB Wall Plug Adapter replacement for models L452, 1510, MH60 and compatible with multiple test equipment series.

AEMC SL12: 1-channel DC voltage data logger (±10VDC) with USB interface, 16Hz sampling, 43-day battery life, and 8MB memory.

Digi-Pas DWL3500XY-USB brings 2-axis high-precision leveling, alignment, and vibration measurement together with 0.001° resolution, absolute and alternate zero modes, and USB-based data logging for precision machine setup and inspection.

Compact and portable design Heat up in 15 seconds, cool down in 30 seconds Low power consumption: 8W Temperature range up to 896°F Metal touch-sensitive switch Power indicator to avoid accidental burns Power Supply USB Input DC5V Power Consumption 8W Temperature 896°F (480°C) ± 10% Auto Sleep Mode 25S Indicator LED Light USB Length 1.5M Accessories USB wire, cap, solder stand, and solder wire

Ergonomic design 3 speeds Wireless operation Long running time

Certified pre-owned VIAVI SmartClass Fiber OLP-82P—handheld optical power meter with integrated patch-cord microscope (PCM), 780–1650 nm coverage, storage for up to 10,000 results, and USB/FiberChekPRO reporting.

AEMC SL20: 1-channel DC current logger (±20mADC) with USB interface, 16Hz sampling, 43-day battery life, and 8MB non-volatile memory.

AEMC SL13: 1-channel DC voltage logger (±50VDC) with USB interface, 16Hz sampling, 43-day battery life, and 8MB non-volatile memory.

AEMC SL11: 1-channel DC voltage data logger (±1VDC) with USB interface, 16Hz sampling, 43-day battery life, and 8MB memory.

Adam Equipment Luna Analytical Balances-LAB 254e: Accurate, high-resolution analytical balance with USB/RS-232 interfaces and a sleek design for easy data transfer. Perfect for demanding lab use.

EXFO FTB-1v2 OTDR kit with installed FTBx-730C-SM8-OPM-EA module for fiber link testing, including iOLM operation and built-in PM/VFL hardware.

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

AFL Noyes M200 OTDR: Handheld, 850/1300 nm, 22dB MM, 26dB SM. Fast fault detection, 6Hrs battery, USB storage—ideal for fiber testing & troubleshooting!

Exfo FIP-420B Video Inspection Probe: High-resolution, portable probe with 5MP CMOS sensor. Ideal for fiber inspection with easy USB connectivity and ConnectorMax2 software.

The INNO Instrument SPA3100 is a compact 3-channel digital power meter designed for accurate power consumption testing across appliances, industrial equipment, and automation systems. It combines touchscreen operation, internal storage, and broad AC/DC measurement capability in a bench-friendly format.

INNO Instrument SBT300 battery internal resistance tester for measuring battery resistance and voltage up to 300V. Includes BZ-1001 zero setting panel, BL-1001 pin test line, BL-1002 clip test line, and installed LAN/RS-232C, analog output, and EXT I/O interfaces.

The Fluke Networks FI-1000-KIT delivers high-resolution fiber end-face inspection with USB connectivity, universal tips, and Versiv compatibility.

Featuring a high-performance 3.5-inch color touchscreen and integrated fiber inspection, this power meter is designed for professionals who demand accuracy and reliability. With versatile testing capabilities and easy-to-use controls, the OLP-82P ensures superior results in fiber networks, making it the perfect solution for field technicians and engineers alike.

AEMC 6292 Micro-Ohmmeter: Portable low-resistance tester with 200A current, precise measurement, and DataView software for efficient reporting.