Search results for: 'connect'

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

WIKA 13330748 delivers reliable –30 inHg to 160 psi measurement with a 4–20mA output, stainless-steel design, and universal 1/4" NPT connection for industrial systems.

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

Phoenix Contact PLC-BSC-24UC/21-21 relay base for 24V AC/DC PLC relays, with LED status display and DIN rail mounting, ideal for automation control systems.

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

Phoenix Contact 2948160 delivers isolated 24V-to-TTL signal conversion for automation systems, providing fast, reliable logic-level interfacing for control equipment.

FM-IUN102 Input Universal Function Module: Seamless integration with DCM & XM for RTD, voltage, current, and binary inputs. Reliable, compact, and high-performance.

Telemecanique XVA-L3 green module delivers reliable 360° machine status indication for Harmony XVA towers, supporting 240V BA15d lamps for clear industrial signaling.

Westinghouse Emerson 5X00070G34 is an Ovation analog input module. The front label identifies analog input ranges of ±20 mV, ±50 mV, and ±100 mV. Module only.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

Rosemount 3051 Pressure Transmitter: Accurate, reliable pressure measurement with Bluetooth® connectivity. Ideal for diverse industrial applications. High performance, easy setup.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Bently Nevada 330101-00-80-05-02-00 3300 XL 8mm Probe built for vibration sensing in 3300 XL monitoring setups, with attached cable and connector shown in the provided images.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

Balluff BFS 26K-PS-L01-S115 color sensor delivers reliable, high-precision color detection for automation, compatible with any PLC using 3×PNP inputs and M12 cabling.

Turck NI10-G18SK-RZ3X2 55MM inductive proximity sensor with 10 mm rated switching distance. Non-flush M18 threaded design with chrome-plated brass housing. Supports 20–250 VAC or 10–300 VDC operation using a 2-wire NC output. Terminal chamber connection with IP67 protection.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Schneider Electric AS-212P-010 Modicon discrete input module provides 12 PNP 24VDC inputs for legacy Modicon PLC systems, enabling reliable sourcing-signal interface from industrial sensors and switches.