Search results for: 'designed house'

Turck NI10-G18SK-RZ3X2 55MM inductive proximity sensor with 10 mm rated switching distance. Non-flush M18 threaded design with chrome-plated brass housing. Supports 20–250 VAC or 10–300 VDC operation using a 2-wire NC output. Terminal chamber connection with IP67 protection.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

CTC ACC199-130 industrial accelerometer with 100 mV/g output for vibration monitoring. Compact 3-pin sensor design for reliable machine condition analysis.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

Honeywell 923AA2W-A7T delivers reliable inductive metal detection with a shielded short-barrel design, wide AC/DC voltage, and durable performance for harsh environments.

Eaton 10250T1 contact block delivers reliable 1NO-1NC control for 30.5mm pushbuttons, ideal for industrial panels requiring durable, high-performance switching.

Eaton 10316H10D limit switch delivers reliable push-roller actuation for industrial control systems, featuring NEMA 1 protection and versatile 1NO/1NC contacts.

Honeywell Kromschroder UVS 10D2 UV Burner Sensor w/ quartz guard, 1/2" NPT. High-reliability UV flame proofing for industrial furnaces and boilers, EN 298-compatible.

Tele Controls RM024LD relay delivers reliable 24VDC switching with LED status and diode protection, ideal for RM series industrial control and automation systems.

Honeywell LSZ7A1A side rotary limit switch delivers durable HDLS performance with 1NO/1NC contacts for industrial machinery and actuator position sensing.

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

Moore Industries IPT2 current-to-pressure transmitter converts a 4-20 mA signal into a proportional 6-30 psig pneumatic output for valves, dampers, and pneumatic actuators in process control systems.

The Allen-Bradley 700-HK36A1 is a Bulletin 700-HK slim line plug-in relay with a 120V AC coil and SPDT contact configuration. It supports up to 16 A resistive loads and is designed for high-density industrial control and interposing applications.

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.

Banner QS30EDVQ diffuse-mode photoelectric sensor with visible red 660 nm beam and bipolar NPN/PNP outputs offers fast response and reliable 1400 mm detection for industrial automation.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Carlo Gavazzi CA18CLN12NA capacitive proximity sensor delivers adjustable 3–12 mm detection with 10–40 VDC operation, supporting reliable material detection across industrial automation and level sensing applications.

Allen-Bradley 1771-A4B PLC-5 16-slot I/O chassis provides a backplane for mounting 1771 I/O modules, distributing 5V DC power, and supporting industrial PLC-5 control system expansion.

The SEKAI RSC-A90 is a ruggedized color camera designed for high-resolution imaging in harsh environments. It features a 1/2" Hyper HAD CCD sensor with 470 TV lines of resolution and selectable NTSC or Y/C output. The camera supports high-speed shutter control up to 1/100,000 second, AGC on/off, and auto white balance, operating from 12 VDC.