Search results for: 'sportsjournalists'

WAGO 750-402 digital input module delivers reliable 4-channel 24V signal acquisition with 3 ms filtering for WAGO 750/753 systems, ideal for industrial sensors.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

Allen-Bradley 2705-K11C1 RediPANEL keypad module provides numeric data entry, message display, and alarm acknowledgment through Remote I/O communication with Allen-Bradley PLC systems.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

Allen-Bradley 1746-IG16 delivers reliable 5V TTL input monitoring for SLC 500 systems, providing fast response, optical isolation, and 16 discrete channels.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Allen-Bradley 1746-IA16 Series B delivers reliable 16-point 120V AC input capability for SLC 500 systems, with optical isolation, LED status, and easy wiring.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

Metso Automation IOP351 is a relay output I/O interface module designed for Metso control systems, enabling reliable field device switching and control in industrial automation and process environments.

The GE Fanuc IC660BBR101 is a Genius I/O relay output block providing 16 normally open relay outputs. Designed for distributed control systems, it supports 115/230 VAC block power, individual output status LEDs, and compatibility with a wide range of low-power AC and DC control devices.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

Allen-Bradley 2706-B21J16 DL20 two-line message display provides clear ASCII text output from a host controller using RS-232, RS-422, or parallel communication for industrial notification systems.

Omron CJ1W-TER01 end cover ensures proper I/O bus termination for CJ1H, CJ1G, and CJ1M PLC racks, providing stable, reliable system communication.

Allen-Bradley 1769-ECR delivers reliable CompactLogix bus termination for 1769 I/O banks, ensuring proper system detection and stable FlexBus communication.

Modicon AS-BDEP-210 115 VAC 8-channel input module with 1.8 kV isolation for 800 Series I/O and 984 PLC racks. Provides reliable ON/OFF detection from 80–132 VAC with fast 10 ms response for stable discrete monitoring in legacy Modicon systems.

Allen-Bradley 1769-OW8I Compact I/O relay output module with eight individually isolated AC/DC outputs for CompactLogix and MicroLogix 1500 systems, supporting mixed-voltage industrial load control.