Search results for: 'into into'

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

The Modicon AS-B875-002 is an 8-channel analog input module designed for use with Modicon 984 programmable controllers. It accepts either 1–5 V or 4–20 mA input signals and converts field analog signals into digital data for PLC processing.

WAGO 750-452 Analog Input Module delivers reliable PLC current signal acquisition for WAGO 750 I/O nodes, enabling precise control in industrial automation.

Westinghouse 1C31234G31 Ovation Contact Input Module delivers 16-channel discrete signal monitoring for Ovation DCS architectures, supporting contact status acquisition for plant control, interlocks, and process visibility.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Allen-Bradley 1771-OFE2 is a PLC analog output module built for 1771 I/O systems, delivering four isolated current outputs, selectable scaling, and block transfer operation for industrial control applications.

Allen-Bradley 1771-ID16 16-point isolated AC/DC digital input module for PLC-5 systems, designed to interface 120V field devices with reliable filtering, isolation, and chassis-based I/O integration.

Opto 22 IAC5 AC input module provides rugged, optically isolated voltage and switch status sensing for G1 I/O racks in industrial control systems.

Allen-Bradley 1771-IAD PLC-5 digital input module with 16 AC/DC inputs. Designed for 120V industrial signals, reliable discrete device monitoring, and seamless integration into 1771 I/O chassis.

The ABB NASM01 Analog Slave Module is designed for use in ABB Bailey Network 90 and INFI-90 distributed control systems. It functions as an analog input slave module, processing incoming analog signals from field devices for industrial process control and monitoring applications.

Allen-Bradley 1771-ID16/A AC/DC 120V isolated input module for 1771 I/O chassis. This 16-point module supports 120V AC/DC inputs and uses backplane power.

Westinghouse 1C31129G03 Ovation diagnostic analog output module for Ovation control system installations. Includes one plug-in module as shown.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

Westinghouse Emerson 5X00070G34 is an Ovation analog input module. The front label identifies analog input ranges of ±20 mV, ±50 mV, and ±100 mV. Module only.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.