Search results for: 'used'

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

The Honeywell 620-1690 is a processor rack chassis used in the legacy IPC 620 / ISSC 600 PLC system. It provides the physical backplane and power distribution framework for processor, I/O, and communication modules in rack-mounted industrial control installations.

Westinghouse Ovation 1C31179G02 Remote I/O MAU module for distributed control system remote I/O communication and field device integration.

Westinghouse Emerson 5X00241G01 Ovation Processor Module brings real-time Ovation DCS control, 64 MB memory, 24V DC operation, Ethernet/serial integration, redundancy support, and diagnostics into industrial automation workflows.

The Yamatake Honeywell J-MHM10 is an industrial system interface module used in distributed control and automation environments. Manufactured in Japan, it operates on DC 5V at 1.08A with optional DC 24V at 320mA support, and is designed for integration within industrial control systems.

The Emerson Ovation 5X00241G02 Processor Module is an industrial control system component designed for integration within Ovation distributed control system architectures. Identified by model number 5X00241G02, it functions as a processor module within compatible Emerson Ovation platforms.

The ABB NASM01 Analog Slave Module is designed for use in ABB Bailey Network 90 and INFI-90 distributed control systems. It functions as an analog input slave module, processing incoming analog signals from field devices for industrial process control and monitoring applications.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

The Honeywell C-HPE00 is a rack-mounted control system module used in Honeywell industrial automation environments. The unit consists of a metal card cage assembly with integrated backplane slots and an attached interface board. This listing includes only the hardware shown.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

Honeywell 511-96019-101 Process Network Interface Module enables reliable communication within Honeywell TDC 3000 and Experion PKS distributed control systems, supporting Process Manager I/O network integration.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

The Modicon AS-B875-002 is an 8-channel analog input module designed for use with Modicon 984 programmable controllers. It accepts either 1–5 V or 4–20 mA input signals and converts field analog signals into digital data for PLC processing.

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.