Search results for: 'Gattouz'

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.

The Fluke 87V multimeter delivers precision troubleshooting for VFDs, motor drives, and power systems with a low-pass filter, peak capture, and a backlit display.

Fluke 114 digital multimeter with backlight offers True RMS accuracy, AutoVolt detection, and LoZ mode for reliable go/no-go troubleshooting.

Fluke 323 clamp meter for accurate AC/DC voltage and current testing up to 600V/400A with True RMS, slim design, and data hold for easy diagnostics.

Fluke voltage tester detects 90–1000V AC with audible/visual alerts, CAT IV rated. Easy, pocket-sized tool for fast electrical checks.

AEMC 1015 Analog Megohmmeter: Compact, battery-operated insulation tester for 500V & 1000V with resistance and continuity measurement in rugged environments.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

AEMC 6422 Digital Ground Resistance Tester Kit 150ft: Fast 3-point testing with auto-ranging, large LCD, and battery-powered portability.

AEMC NC-1 Non-Contact AC Voltage Detector: Indoor use, detects 120-240VAC within 5mm, 600V CAT III safety rated with battery-powered operation.

AEMC 400D-10 Digital FlexProbe® offers TRMS AC current up to 400A with 6ft lead, compact 10” sensor, ideal for tight spaces and industrial to residential use.

Fluke VPS410-II-V 10:1 Voltage Probe Set: 500MHz high-precision testing, reliable performance, and essential accessories for accurate measurements!

Fluke VPS41 Voltage Probe Set: High-performance probes for 120B Series. Accurate measurements, CAT IV rated, and built to last for industrial and professional use.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

The Amprobe AT-6010 Advanced Wire Tracer Kit is designed to trace energized and de-energized wires, identify breakers and fuses, and locate shorts or opens. The kit includes a receiver with large LCD display and transmitter supporting operation up to 600 V AC/DC in CAT III environments.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke 190-102-III CAL ScopeMeter combines a 100 MHz oscilloscope and DMM with CAT IV safety, deep memory, and traceable calibration for industrial use.

Fluke LVD2 CT Volt Light detects 90–600 V AC without contact, using dual-sensitivity LED indicators and an ultra-bright flashlight for safe voltage checks.

Fluke 1738/B Advanced 3-Phase Energy Logger captures voltage, current, power, and harmonics with Fluke Connect support for in-depth energy analysis.